Cosmo calculator--recession speed tutorial

marcus

This thread could be a tutorial/discussion using Morgan's online calculator that calculates recession speeds, if you give it the redshift.

If you try out the calculator and have questions, or are surprised by anything, please ask. No telling what you get for answers
maybe some that conflict : but by asking you at least start the process of getting clear about redshift and recession speed.

Lots of stuff is observed to have redshift 2 or more, some quasars we observe have redshift over 6, and the CMB has redshift 1100.

With Morgan's calculator you can enter a redshift, like 2 or 6, and find out the present distance to that thing, and how fast it is receding---how fast the distance to it is growing (assuming it is stationary in the space around it wrt CMB).

http://faculty.cns.uni.edu/~morgan/a...gy/cosmos.html

You've heard that Dark Energy is 73% and the combined total for matter including ordinary and dark matter is 27% and you probably have seen the figure for the Hubble parameter that is commonly used, which is 71 km/second per Megaparsec. MORGAN BELIEVES YOU SHOULD WORK A LITTLE SO TO USE THE CALCULATOR YOU HAVE TO TYPE IN 0.27 and 0.73 and 71

Morgan makes you type in values of Omega matter density (.27) and Lambda dark energy density (.73) yourself. And the current best figure for the Hubble parameter 71. THEN YOU TYPE IN THE REDSHIFT, like say 6 for a distant quasar. So what you've typed in from top to bottom:
.27
.73
71
6

Then press "calculate" it will tell you the recession speeds. And how long ago it was that the quasar was radiating the light that we are now getting from it.

And how far away it used to be when the light left it on its way to us, and how far away the quasar is at the present time.

Wallace

Nice tool that, thanks for the link.

marcus

thought you'd like that if you hadn't seen it already

Ned Wright has the same basic calculator at his website, but different options.
He actually has three slightly different cosmology calculators, but if I remember right none of them give recession speed.

they give other useful stuff but not that.

so Morgan's is noteworthy because of giving recession speeds.

If anyone has not checked out Wright's calculators here are links

standard model (gives angular distance as well as comoving and travel time)
http://www.astro.ucla.edu/~wright/CosmoCalc.html

advanced version CosmoCalc (lets you put in the dark energy equation of state and other parameters)
http://www.astro.ucla.edu/~wright/ACC.html

a BACKWARDS version of the CosmoCalc (you put in the travel time and it gives you back the redshift, instead of other way round)
http://www.astro.ucla.edu/~wright/DlttCalc.html

marcus

The URL for Morgan's CosmosCalculator changed. The one I gave in the first post no longer works. here is the new one:

http://www.uni.edu/morgans/ajjar/Cosmology/cosmos.html

If you use it be sure you type in 0.27, 0.73, and 71
in the first three boxes on the lefthand margin

then type in the redshift z that you want, and press 'calculate'

cristo

Thanks for all the links, marcus-- they seem very useful!

George Jones

Siobahn Morgan (University of Northern Iowa) has a page of astronomy, astrophysics, and cosmology applets, which I found from removing some stuff from the end of the above URL.

http://www.uni.edu/morgans/ajjar/

From this page:

"This website is set up as a resource for instructors of astronomy at all levels. Items are presented in a variety of formats and levels of complexity, so that instructors at all levels from K-12 to college level could make use of the programs here."

stevebd1

I've recently been looking at how redshift is used to calculate distances to various objects in the cosmos and I now feel I have a fair undertsanding of the difference between relativistic redshift and cosmological redshift. Attached is a table I put together comparing the data from both types of redshift and my question is, would it be a reasonable assumption to say that the 'time/distance' from the relativistic redshift data is the actual time/distance the light itself has travelled? There are a few discrepencies when you add the 'age then' from the cosmo redshift data to the 'time/distance' from the relativistic redshift data which makes me suspect this might not be the case (unless it's just data from two different equations not entirely working together). If it isn't, what exactly is the relevance for the relativistic redshift data?

Steve

Attached Thumbnails

 

marcus

I don't think so---or perhaps I don't understand your third column of numbers which you call
"time/distance" (units: Gy/Gly)

The special relativity doppler shift
could be calculated for a particle or other object which is at ZERO DISTANCE from us, at the instant it whizzes past us.
Therefore your fraction "time/distance" is indeterminant. It might very likely have zero denominator, and the time is not well defined. But maybe you can explain your third column so I can understand.

I understand your first column is just z values from 0.01 to 1089, which you are going to interpret as EITHER a dopplershift z, or as a cosmological redshift z.

YOUR SECOND COLUMN LOOKS GOOD to me. It looks like you just used the special rel doppler formula. I introduce a variable rho = 1+z for convenience in writing it:

[tex]\rho = 1+z = \sqrt{\frac{1+\beta}{1-\beta}}[/tex]

[tex]\beta = \frac{\rho^2 - 1}{\rho^2 + 1}}[/tex]

so in your second column you took z to be a doppler shift, and you just plugged into the second equation here and found beta, the speed in units of c.

Your third column, as I say, mystifies me. But the OTHER COLUMNS SEEM STRAIGHTFORWARD. You could have gotten them straight from Morgan's calculator.
In those columns you are interpreting z as a COSMOLOGICAL redshift, which is a totally different thing from a special rel Doppler shift. So there would probably be no relation between those other columns (four thru nine)



SR doppler formula is used when two objects are right close together in the same reference frame. In that case, expansion of largescale distances can normally be neglected.
Or it could be used for CORRECTION due to local motion in a receding frame. But that probably doesn't apply here.

The main thing you would need to explain, to make it clear to me, is what your time/distance column actually means.
When you observe a certain SR doppler shift (call it z if you want) then how do you decide on a distance and how do you decide on a time----so what is this ratio you call time/distance?

stevebd1

Thanks for the reply Marcus. In truth, I posted a question in another thread (http://www.physicsforums.com/showthread.php?t=206984) asking if the relativistic redshift equation incorporated the cosmological redshift (which I now understand is a seperate set of equations). I did some searching and found this thread and the other one called 'Hubble parameter in early universe' which went towards helping me understand the cosmological redshift. The figures you see in columns 4 to 9 are taken from the cosmo calculator, I was inquiring if there was some connection between them and the relativistic redshift figures (which it appears there is not).

The third colomn is based on figures produced in the following equations-

Doppler effect (which applies to < z = 0.1)

[tex]r (distance) = \frac{v}{H} = \frac{zc}{H}[/tex]

if z = 0.03

[tex]r (distance) = \frac{v}{H} = \frac{zc}{H} = \frac{0.03c}{71} = \frac{8993.775}{71} = 126.673 Mpc = 407.25 Mly (or 0.407 Gly)[/tex]

Relativistic Doppler effect (which applies to > z = 0.1) I've actually applied this to anything over z = 0.03

[tex] z = \sqrt{\frac{1 + v/c}{1 - v/c}} -1[/tex]

which provides the following equation-

[tex] v/c = \frac{(z + 1)^{2} - 1}{(z + 1)^{2} + 1}[/tex]

therefore if z = 0.1

[tex]v/c = \frac{(0.1 + 1)^{2} - 1}{(0.1 + 1)^{2} + 1} = 0.095c[/tex]

[tex]r (distance) = \frac{v/c}{H} = \frac{0.095c}{71} = \frac{28480.2875}{71} = 401.13 Mpc = 1309 Mly (or 1.309 Gly)[/tex]

with some help from the following calculator-

http://hyperphysics.phy-astr.gsu.edu...hubble.html#c3

Hopefully the above sheds some light on column 3. It seemed odd that the relativistic redshift would produce a set of figures that appear to be describing time or distance (as implied at the hyperphysics website).

Steve

marcus

Steve, I see now how to read the third column. All the other columns made sense right away and I've commented already.

You've taken care to be clear and use LaTex which makes it very easy to read and understand your equations and calculations, which helps and I hope you are rewarded for this both now and in the hereafter.

You drew the right conclusion. At very small redshift things moosh together and different things turn out to be approximately the same so there appears to be connection. One can used sloppy methods to calculate and it works approximately. You only get forced to be careful at larger redshifts.

What your table shows is that what you get by special rel doppler and a naive application of the Hubble equation does NOT correspond to the reality you get from a good redshift calculator. having made that point, the natural thing to ask is WHY.

WHY DO THE DISTANCES IN COLUMN 3 NOT MATCH UP TO ANYTHING?
Well for one thing the Hubble equation v = H₀ d applies only to recession speed and distance at this instant right now in January 2008.

As long as z is small and v is small we can be sloppy and forget about differences between speed then, and speed now, and average speed during the time of flight---it is all about the same. But for larger z, watch out!

So when you take a COSMOLOGICAL REDSHIFT and apply the special rel inverse doppler formula to it, you do in fact get a speed. But is it the speed NOW?
Or is it the speed then, when the light set out on its journey to us? Or what is it supposed to mean? some average?

It isnt anything. It isnt well defined. Because special rel is not generally applicable. But whatever it might be, it surely is not the speed NOW. so you cannot apply the Hubble formula! The v = H d equation simply does not apply.

So when you apply it and get a distance that does not match anything, nobody should be surprised. That is my attempt to answer the question of why it doesn't match the cosmo calculator results.

BTW Ned Wright calculators seem to have more decimal place accuracy. I'm not an expert in computational stuff, at all! I just like Morgan a lot because it gives recession speeds, and Wright does not. But if you are doing some calculating where you need precision you might compare.


Another thing. At first when I read your column 3 i thought time/distance meant a RATIO of time divided by distance.
After your next post, I realized that you meant "time OR distance" and that the units were "Gy OR Gly". this is just the normal hazards of notation. that is probably the main reason I didn't see what you were doing immediately. I will be more alert to that possible reading another time.

stevebd1

Thanks again for your reply.

Would it be a fair assumption to say -

The simple Doppler effect equation can be used when z < 0.01
I revised this from 0.03 which still had a degree of error when compared to the figure from the relativistic Doppler effect equation. z = 0.01 still covers a radius of 137.815 Mly which takes us well out of the Local 'Virgo' Supercluster.

The relativistic Doppler effect equation should be used when z < 0.1 to take in account special relativity.

The cosmological redshift equations are used when z > 0.1 to take into account cosmic expansion.

But as a whole, it's normally best to use the cosmological redshift equations in order to get the most accurate results (I'm aware there is a gravitational redshift but this applies locally so I've not looked too much into that).

I would be interested to see one of the equations that the Ned Wright & Morgan calculators use in order to work out the now and then figures. I noted there was an equation in 'Hubble parameter in early universe' thread-

Would this be an example? If it is (though I could make a guess at what they were), I'd appreciate if some-one could confirm what the quantities are.

regards
Steve

stevebd1

Thanks again for the posts, Marcus. One last question. Hyperphysics is a great website for basic astrophysics and I'm a little perturbed by the fact that they would provide a cosmic calculator based the SR doppler equation that would produce results for z all the way up to 100,00+ without any mention of the potential effect of the cosmological redshift. Is it possible the Hyperphysics web page is out of date or misinformative even.

Hyperphysics calculator-
http://hyperphysics.phy-astr.gsu.edu...hubble.html#c3

regards
Steve

Jorrie

Sorry, it was a bit sloppy of me not to define all the parameters used there. Here they are: [itex]a[/itex] is the expansion parameter, [itex]H_0[/itex] Hubble's constant in appropriate units (inverse time), [itex]\Omega_m[/itex] is the matter density parameter, [itex]\Omega_r[/itex] the radiation energy density parameter and [itex]\Omega_v[/itex] the vacuum energy density parameter, all as fractions of the critical density.

Apparently, Morgan's calculator does not consider radiation energy density, which is only important in epochs z > 1000. I've used this equation to obtain information for z (or a) vs. t up to [itex]z=10^6[/itex], [itex]t= t_0+10^{11}[/itex] seconds, where it should still be accurate.

BTW, I think that column 3 of yours (post 7) describes look-back time or look-back distance in terms of light travel time, which are obviously equivalent.

marcus

it gets it about "Wright" as a rough approximation, doesn't it?
here are some sample lookback times using Ned Wright's calculator
http://www.astro.ucla.edu/~wright/CosmoCalc.html

I would not encourge anybody to think of what you get in Steve's 3rd column as the real lookback time (in a cosmology context)
because it could get them confused. Using SR doppler leads to misconceptions about the lookback time or anything else involving the cosmological redshift z, because the cosmological z is not a doppler. But if you want a rough approximation it is definitely the right order of magnitude. Maybe by adjusting parameters one could get it even closer. Thanks for pointing out the similarity, Jorrie!

Jorrie

Yep, I agree. I shot from the hip and I've missed!

I have done a little work before on lookback times and found that it is more than just a little "model dependent". As a fair example, I've considered: (i) a flat universe with no cosmological constant against (ii) a flat universe with ~73% vacuum energy component, both for a Hubble constant of ~66 km/s/Mpc and a redshift z=1.

The resulting curves are shown in the attached graph, with widely different lookback times/distances, s1 and s2. Neither has anything to do with Doppler shift, because the redshifts are the same! The lookback distances depend on the shape of the expansion curve.

Lessons: 1. Don't shoot without aiming! 2. Don't confuse cosmological redshift with Doppler shift!

-J

Attached Thumbnails

 

marcus

Jorrie you impress me as having good knowledge and communication skill. I am not part of PF staff so I can't say anything besides personal opinion---don't speak for anybody but myself. But I would propose that you think about starting a thread which is a volunteer Jorrie basic cosmology tutorial thread.

See if we can't get half a dozen of the regular visitors who are interested in learning basic cosmology to participate in the thread. If you set it up, posted a short outline of what you planned to cover, if people showed interest, then I would certainly steer people to that thread.

You know how to start threads. You just start a thread with a name like
"Basic cosmology tutorial (if there's enough interest)"
and list a very brief "course outline"
and ask people to respond to your first post if they are interested, and if you think it's enough people then you proceed to the next topic of your outline.

I would say make each "lecture" quite brief, don't write a lot, and then if you get responses and questions it makes them work, instead of you working, and only continue following the outline as long as people respond.
and keep your part concise giving them links to further reading as needed to fill in.
I don't want to make it sound like it would be a lot of work for you.
(But it would still be too much work for me, otherwise I'd have done it already )

stevebd1

While looking for more info regarding the cosmological redshift I found a cosmological calculator that also provided 'Omega Matter then', 'Omega Lambda then' and 'Omega radiation then' (which gets introduced at about z = 38). Unfortunately its inbedded in Yahoo geocities-

http://www.geocities.com/alschairn/cc_e.htm

Steve