Averagesupernova's latest activity

But as mentioned above, tubes are desired not just by some audiophiles, but also for guitar amplifiers. Most electric guitarists use...

I've always heard that if laid down on its side to turn it upright and wait the same amount of time that it was laid over. Of course...

ALFALFA Sprouts are highly nutritious and rich in vitamins B1, B2, C, E, K, D and especially vitamin A; minerals such as phosphorus...

Agreed. It is very difficult to prevent 'wind-up' in hydraulics. If you've ever seen a hydraulic hose fail under pressure it's somewhat...

Ok. Depending on the system, sometimes the return can have a slight pressure. Don't be too sure that the main return doesn't have some...

If you've ever used a hydraulic press you will realize that about when you are ready to give up thinking the 20 ton bottle jack can't...

My guess it is to prevent drift. There is likely a controlled small leak (bypass) that returns to the reservoir. When the time comes for...

So this machine spends a pin with each stroke?

Very large tires, some sandblasting now and then, air tools, etc.

Or, you could pay attention to which poster is posting what.

They have creative ways of lying about the spec. Maybe the service factor is significantly reduced. This effectively says it will start...

The 5 HP spec on your old motor is quite likely false. If the motor has a spec for continuous amperage draw that will give you an idea...

So what's stopping you from redrawing the circuit? Draw a battery and connect the positive to Vcc and negative to the ground(s) or...

It's actually my sister who had had some health issues. I've thought she's crazy about some of the things in her house that she can...

Russ I realize I'm discussing this with a HVAC engineer. As far as leakage after the filter goes, I've found plenty of cases where there...