Current direction in a vertical conducting wire on horizontal rails

3 replies · 2K views · last reply
Physicslearner500039
Messages
124
Reaction score
6
Homework Statement
A straight piece of conducting wire with mass and length is placed on a friction less incline tilted at an angle Θ from the horizontal . There is a uniform, vertical magnetic field at all points. To keep the wire from sliding down the incline, a voltage source is attached to the ends of the wire. When just the right amount of current flows through the wire, the wire remains at rest. Determine the magnitude and direction of the current in the wire that will cause the wire to remain at rest.
Relevant Equations
F=ILBsin(Θ) (N); F=mg (N)
Diagram of a wire of mass M lying across two parallel inclined rails that make angle θ with the horizontal, with length L between the rails; a vertical arrow labelled B (vertical) points upward.

I am struggling with the angles. Since the conducting wire is moving down for it to be stand still, the force should be opposing it, hence the current should be from Right to Left.

Diagram of a wire of mass M and length L resting on two inclined rails at angle theta, with a vertical magnetic field B pointing up, a current arrow along the wire, a force F arrow at the left rail, and a downward mg arrow.

I am confident of the Force direction and its value is if ## I ## is the current
##F = ILB (N)## since L and B are perpendicular.
The gravitational force is ##mg (N)## which is acting vertically down. From the previous posts i assume if gravitational force is acting vertically down it does not have the other components. I am confused if the gravitational force has a component along the bar in the downward direction? Please advise.
 
Physicslearner500039 said:
I am confused if the gravitational force has a component along the bar in the downward direction?
It has. Sketch and end view to see it: the normal force from the incline is, well, normal to the incline, and compensates part of mg and part of F. The other part of the normal force has to be compensated by the other part of F.
 
  • Like
Likes   Reactions: Physicslearner500039
Physicslearner500039 said:
I am confused if the gravitational force has a component along the bar in the downward direction?
What is making the wire slide down the incline?
 
  • Like
Likes   Reactions: Physicslearner500039
Yes now i understand
Free-body diagram with axes X and Y meeting at point J. Labelled forces: F pointing left along X, Fcos(Θ) along an inclined line, mg pointing down along Y, and mgsin(Θ) along the inclined line. Angles marked Θ and 90-Θ.

##IBL\cos\theta = mg\sin\theta##
##I = \frac {mg\tan\theta} {BL}## Amps
The ##mg ## component along the X-axis is 0. I got confused with that. Thank You.
 
  • Like
Likes   Reactions: BvU