DC Circuits Homework: Calculating Power & Resistance

Join the discussion
Registration is free. Ask a follow-up in this thread, or start your own.
5 replies · 2K views
mustang1988
Messages
26
Reaction score
0
1. Eight lights are connected in parallel to a 119V source by two leads of total resistance 2.5 ohms. If 240mA flows through each bulb what is the resistance of each? What fraction of the total power is wasted in the leads?


2. V=IR, P=I^2(R)



3. V=.24(119)=495.83/8=62ohms
P=(.24)^2(62)=3.57W
These are the answers i got but according to my book they are wrong. Can anyone tell me what I am doing wrong? thanks
 
Physics news on Phys.org
Well as for your first question you seem to have V=iV.

Now you know the resistors are connected in parallel.

To find the total resistance of all components, add the reciprocals of the resistances R of each component and take the reciprocal of the sum. :D.
 
Last edited:
2.5ohms is the total resistance? I thought that was just the resitence in the wire going from the battery and the wire going to the battery
 
Last edited:
In addition to what you already know about the circuit, you need (well, I suggest):

1) An equivalent circuit where you include a 2.5 ohms series resistor to represent the loss in the wires.
2) Kirchoff's Current Law
3) Kirchoff's Voltage Law
4) Ohm's Law
5) The expression for power.

Use them in that order, and see how that goes.
 
what is Kirchoff's current law and voltage law? they're not in my book