Does a modeled diode stay in forward conduction or switch states?

1 reply · 1K views · last reply
RaymondDrok
Messages
1
Reaction score
0

Homework Statement


Circuit schematic with input source VIN, capacitors C1 and C2 = C1, diodes D1 and D2, output VOUT, and voltage Vx marked at the junction between C1 and D1.


Homework Equations


Model diode in reverse direction as an open, model diode in forward direction as a short.

The Attempt at a Solution



Handwritten voltage-doubler circuit sketches labelled a, I, II, III and IV, with a graph e of Vin (green) and Vout (red) against time, alternating between 1V and -2V.


In part e of the question, does the circuit stay in state 1 after it gets into state one or does it change states?
 
Simulator plot over 0 to 100 ms: green sinusoid Vx swinging between about -1.6V and 0.6V, red nearly flat Vout trace near 0.1V, with time axis in ms and voltage axis in V.

This is a simulation of the specified circuit, using real diodes. Red is Vout, green is Vx.
Now let's turn D2 around and see what happens:
Simulator plot over 0 to 100 ms: green sinusoid Vx swinging between about -1.6V and 0.6V, and red stepped waveform Vout falling from 0V to about -1.0V in steps.