I need help making a relation between piezoelectricity and earthquake

SiddSha
Messages
2
Reaction score
0
TL;DR Summary
Tasked to formulate an equation relating piezoelectric effect and seismic waves during earthquakes. Using magnitude and distance attenuation to calculate stress/strain on the piezo system from earthquake energy. Need help checking if the basis and idea are correct
IMG_0039.webp
 
Engineering news on Phys.org
Is this for schoolwork? What resources have you been reading to try to come up with this?
 
Yes it is, so far I have only done it in a purely logical manner
 

Thread 'Following up on the recent thread about Earth Resistance measurements'

I have recently moved into a new (rather ancient) house and had a few trips of my Residual Current breaker. I dug out my old Socket tester which tell me the three pins are correct. But then the Red warning light tells me my socket(s) fail the loop test. I never had this before but my last house had an overhead supply with no Earth from the company. The tester said "get this checked" and the man said the (high but not ridiculous) earth resistance was acceptable. I stuck a new copper earth...
View full post »
Thread 'Electromagnet magnetic field issue'

Thread 'Electromagnet magnetic field issue'

Hi Guys We are a bunch a mechanical engineers trying to build a simple electromagnet. Our design is based on a very similar magnet. However, our version is about 10 times less magnetic and we are wondering why. Our coil has exactly same length, same number of layers and turns. What is possibly wrong? PIN and bracket are made of iron and are in electrical contact, exactly like the reference design. Any help will be appreciated. Thanks. edit: even same wire diameter and coil was wounded by a...
View full post »
Thread 'Beauty of old electrical and measuring things, etc.'

Thread 'Beauty of old electrical and measuring things, etc.'

Even as a kid, I saw beauty in old devices. That made me want to understand how they worked. I had lots of old things that I keep and now reviving. Old things need to work to see the beauty. Here's what I've done so far. Two views of the gadgets shelves and my small work space: Here's a close up look at the meters, gauges and other measuring things: This is what I think of as surface-mount electrical components and wiring. The components are very old and shows how...
View full post »

Similar threads

Quick Question about a Piezoelectric shoe for project
Replies
1
Views
2K
Amplifier for piezoelectric sensor, OP Amp circuit
Replies
6
Views
5K
How Does Force Affect Voltage in Piezoelectric Materials?
Replies
10
Views
8K
Why does Piezoelectric output voltage dropped when load is added?
Replies
12
Views
3K
Earthquake precursors associated with the Turkey earthquakes
Replies
1
Views
3K
M 7.4 - 2025 Drake Passage Earthquake - unusual
Replies
3
Views
2K
M6.8 Earthquake, 40 km SSW of Bartolomé Masó, Cuba
Replies
2
Views
2K
Piezoelectric energy harvesting systems
Replies
1
Views
2K
(Unprecedented?) Cluster of earthquakes in Greek islands
Replies
13
Views
2K
Solar panels and piezoelectric discs
Replies
2
Views
3K

Hot Threads

Recent Insights

Back
Top