Retired old phart

  • Thread starter Oldphart
  • Start date
4 replies · 90 views · last reply
Oldphart
Messages
2
Reaction score
1
How did you find PF?
Via a daily Google News feed
Retired life long scientist here. Born in the mid 50's and began learning electronics in the 60's. Built 1st transistor radio from a Remco kit when I was 5. As a kid salvaged parts from several TVs to build various vacuum tube projects and have fun with the HV flybacks... Had oodles of fun playing with hv discharges and low pressure plasma experiments. Built more than one marx bank with the best giving 200kv discharges and of course a Tesla coil. In 1970 built a small dye laser following https://www.scientificamerican.com/article/the-amateur-scientist-1970-02/ that foreshadowed my life long career in lasers.

In the late 70's started with Photon Sources as an industrial co2 laser field engineer. 1980 left them with another engineer to co-found Synchron Laser Service where I was the lead R&D engineer and lead field engineer. We finally shut down Synchron in 2022 and I moved to Laser Mech as a R&D engineer until i retired in 2024 after over 40 years in the business.

Still intensely interested in all things science.
 
Last edited:
berkeman said:
Welcome to PF. It's good to have you here. :smile:
Heh, along your tag note, as a kid the Radio Amateurs Handbook was one of my go-to Bibles for learning electronics. The projects for various hv supplies led to great fun :D Still have it.

For those interested in lasers I highly recommend https://www.repairfaq.org/sam/laserfaq.htm#faqtoc which has been around since 1994. Details on building home versions of every type of laser out there.
 
Last edited:
berkeman said:
How do you align the semi-transparent mirrors?
Key words there are "semi transparent". Use an external alignment laser to shine down center of the bore and tweak first the rear mirror to reflect back into the external laser the the same with the output mirror. When going straight back the return beam will interfere with the incoming beam and will cause a very visible pumping of the beam getting brighter/dimmer.

For very short resonators like the dye laser just precise placement of the mirror to be measurably square with each other works fine if not exactly optimal.