Solving a Physics Problem: Finding Pole Mass, Forces & Distance

AI Thread Summary
The discussion revolves around solving a physics problem involving a 6 kg box suspended from a horizontal pole of unknown mass. Peter exerts a force of 67.9 N at a 60-degree angle, while Paul's force is unknown and applied at a 30-degree angle. The system is in static equilibrium, requiring that all forces and torques sum to zero. A free-body diagram is recommended to visualize the forces acting on the pole. Participants emphasize the importance of balancing the forces to find the unknowns, including Paul's force, the pole's mass, and the distance from the left end to where the box is hung.
PhilCam
Messages
46
Reaction score
0

Homework Statement



At the end of the semester Peter and Paul are moving out of the dorms. The are holding a 6 kg box hung from a homogeneous pole of unknown mass. The position from which the 6 kg box is hung is also unknown. The length of the pole is 1.4 m. As they carry the box, the pole is horizontal. At the left end of the, Peter applies a force of 67.9 N making an angle of 60 degrees with the horizontal. At the right end, Paul applies an unknown force making a 30 degree angle with the horizontal. The system is in static equilibrium.

A) The x-component of the force applied by Peter is?
B)The magnitude of the force applied by Paul is?
C)The unknown mass of the pole is?
D) The distance to the left end of the pole form the point where the 6 kg mass is hung is?


I have figured out A by 67.9 x Cos 60 = -33.95.

For part B, I assumed that the magnitude of Paul would have to equal the magnitude of Peter's force but I have not been able to come up witht he answer. Thanks.
 
Physics news on Phys.org
Start by drawing a free-body diagram of the pole. Remember that in static equilibrium, all forces and all torques must sum to 0.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top