Steam plant output calculation for evening class assignment

  • Thread starter anthonyk2013
  • Start date
  • Tags Tags
    Plant Steam
8 replies · 2K views · last reply
anthonyk2013
Messages
125
Reaction score
0
Im attempting this question for an evening class I am attending. hope I am posting in the right place. I'm not sure where I have gone wrong think its where I rearranged my formula to find steam output.

Question attached below
 
Attachments
  • Scanned printed exam question on a steam generating plant with an economiser, evaporator and super-heater, with parts a) and b)(i-iii) and specific heat capacity of water = 4.187kJ/kgK.
    steam plant 1 001.jpg
    14.9 KB · Views: 517
  • Handwritten working on lined paper for a steam plant question Q15: a temperature-entropy style graph with 350 and 100 degree marks and points 1, a, b and 2, followed by given values and formulas for heat and steam mass flow, and enthalpy table values.
    steam plant 2 001.jpg
    33.6 KB · Views: 505
  • Handwritten working on lined notebook paper: 77(300000 x 800) / (3148 - 188.35) = 624398 kg/h, followed by an Economiser section with Q_econ = m_dot(h_m - h_i) / (ω x m_c) = 78(1408 - 188.35) / (300000 x 800), h_i = 188.35 kJ/kg, h_m = h_f @ 150°C = 1408 kJ/kg, and m_dot = 624398 / 800 = 78 kg/s.
    2015-01-25 001 001.jpg
    31 KB · Views: 514
The work is a bit unclear. I'll get back to you in a day or so.
 
  • Like
Likes   Reactions: anthonyk2013
I think I calculated the steam output wrong, I have the over all efficiently of the system 77%, what formula do I use the calculate steam output?
Q=M(h2-h1)
 
Yeah that's the one..!
For calculating the steam output, you can directly use the 77% efficiency without involving the economizer and super heater (if I'm not wrong).
So 77% of the heat obtained from the combustion of coal is used to convert water to steam.
 
siddharth23 said:
Yeah that's the one..!
For calculating the steam output, you can directly use the 77% efficiency without involving the economizer and super heater (if I'm not wrong).
So 77% of the heat obtained from the combustion of coal is used to convert water to steam.

77% is the overall efficiency am I right ? So did I divide .77 by h2-h1 to get steam output?
 
anthonyk2013 said:
77% is the overall efficiency am I right ? So did I divide .77 by h2-h1 to get steam output?
Yes! And equate it with the energy provided by the combustion of coal. Tell me if that gives the right answer.