Two nonconducting spheres problem

  • Thread starter Thread starter n77ler
  • Start date Start date
  • Tags Tags
    Spheres
AI Thread Summary
The problem involves two nonconducting spheres with a total charge of 13.4 μC and a repulsive force of 2.777 N when separated by 0.362 m. The correct equations to use are Coulomb's law, F = k(q1)(q2)/r^2, and the total charge equation, q1 + q2 = 13.4 μC. A user attempted to solve for the charges but encountered issues with the equations, particularly with a typo in the total charge equation. After deriving a quadratic equation, they found potential values for q2 but still did not arrive at the correct answer, indicating a misunderstanding in the application of the equations. Clarification on the equations and their correct usage is needed to resolve the issue.
n77ler
Messages
89
Reaction score
0

Homework Statement



Two nonconducting spheres have a total charge of 13.4 μC. When placed 0.362 m apart. the force of repulsion is 2.777 N. What is the value of the greater charge (Give your answer in coulombs)?

Homework Equations





The Attempt at a Solution

 
Physics news on Phys.org
Hint: Coulomb's law.
 
I tried this equation below because I just put in the total charge for Q and got the wrong answer. I don't understand how I get answers for two different charge swhen I work through it.
E= k (q1+q2) / r^2
 
well first equation is F = K(q1)(q2)/r^2 and second equation is q1q2=13.4 μC
2 equations 2 unknowns.
 
tongpu said:
well first equation is F = K(q1)(q2)/r^2 and second equation is q1q2=13.4 μC
2 equations 2 unknowns.
You are correct, but that second equation has a typo: it should be q1 + q2 = 13.4 μC
 
F=kq1q2 / r^2 q1 + q2 = 13.4x10^-6C
2.777= (8.99x10^9)q1q2 /(0.362)^2
q1q2=4.05x10^-11
q1=(4.05x10^-11)/ q2

(4.05x10^-11)/q2 + q2 = 13.4x10^-6C
(4.05x10^-11)/ q2 + (q2^2)/q2 = 13.4x10^-6C
(4.05x10^-11) + (q2^2) = (13.4x10^-6C)q2
quadratic, when solved q2=4.60x10^-6, q2= 8.80x10^-6

Both of these numbers when added up will equal the total charge and when I sub them into the equation q1=(4.05x10^-11)/q2 I get the same thing. However this is not the correct answer, could someone point out where I went wrong?
 
Last edited:
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Trying to understand the logic behind adding vectors with an angle between them'
My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...
Back
Top