Workshop crane cantilever, column, pivot and ram pin analysis

1 reply · 2K views · last reply
x_eyeless_x
Messages
2
Reaction score
0

Homework Statement


need to calculate cantilever beam analysis, column analysis, pivot pin analysis, ram pins analysis
the attached pdf has the picture of the crane i intend to use.



Homework Equations


Tensile stress, σ = F/A

General bending equation: M/I = σ/y

Moment of inertia for a rectangular section: bh^3/12

Moment of inertia for a circular section: Ix = Iy = ∏D^4/64

Moment of inertia for a hollow circular section: Ix = Iy = ∏(D^4-d^4)/64

Shear stress on a bolt in double shear, σ = F/(∏/2)D^2

Torque = Fr


The Attempt at a Solution


the pics attached shows the attmept of my calculation.
View attachment RC1000.pdf

Handwritten working on lined paper: a stress formula sigma = M/(beta Z) with values 300 x 10^6 and 6.25 x 10^3 over 0.9 x Z, Z = 324 x 10^3 mm^3, with 'not sure' written beside it; below, A = F/sigma and 500 = F/12.3 'from table', F = 6150 N; at the bottom right a small sketch of a pin and clevis with forces T pointing outward on each side.


Handwritten force and moment equilibrium equations on lined paper, rotated sideways: sum of Fx, Fy and M equal zero, with Ax, Ay, J values and terms such as 6.9 x 10^3 and 13.8 x 10^3 N, and Ax = -11.95 x 10^3 N, Ay = 13.8 x 10^3 N, M = 8.95 x 10^3.