Van de graaff Definition and 57 Threads

Hello, Ill start off by saying, I don’t have an engineering degree and only play with electronics for fun, so prepare to laugh at my questions. I've been making this generator for over 6 months now, but only because I always have other projects going on has taken so long. I learned about Van...

Wonder how much skill is needed?

I'm trying to build a Van de Graaff generator, but it does not generate any charges. The problem is, I don't know which part is accidentally shorted, or grounded. I use both PVC pipes for the top and bottom rollers. The belt is neoprene rubber, 1mm thick. The rollers are bolted on aluminum...

I know that the potential of the sphere at its surface is ##V(a)=kQ/a##, and the electric field generated by it is ##E(a)=kQ/a^2##, which gives me ##V(a)=aE(a)##. When the electric field at the surface is as in the question, we have...

I attached a jpeg of a Van De Graaff generator off the web. Is the point in the photo the Van De Graaff ground? Suppose I have a wire coming out of that slot instead of a discharging sphere, would that hole still be the Van De Graaff ground?

Hi, I recently decided to make a Van De Graaff generator and I have a question regarding the top load sphere. I managed to get myself a very nice 60cm-diameter stainless steel polished sphere. Before I start cutting up the bottom part so to make room for the top roller with the collection comb...

Hi. I have two questions about the following video with a 200'000 V Van de Graaff generator: At 5:57 he touches ground, apparently feeling nothing. He explains this with a very low current and proceeds that the current from a 120 V outlet is high and might kill you. But with ##I=U/R## and...

<< Mentor Note -- thread moved to the Sci-Fi writing forum after starting in the technical forums >> Hey folks, I'm interested in the feasibility of providing high DC voltages (~kV) in a physically small and low mass package (~grams). The power source does not actually need to be very energy...

Greetings, How do you know what the true output voltage on a Van De Graaff generator is? Can it be measured? If a manufacturer advertises it as having an output voltage of 100,000 Volts, is this an idealistic, classroom quote or the true quote they have actually measured? If the output voltage...

Greetings, Does anyone know of a way to measure the actual charge of a Van De Graaff generator, in Coloumbs? One way I thought might be to measure the voltage potential around the generator, and calculate the charge from V = kQ/r, but would this work in just regular air? What obstacles would...

My question regards the polarities of the excitation supply and terminal in an external-excitation VDG. As you all probably know, external excitation VDGs use a voltage supply (usually 5,000-10,000V) to influence the charge on the lower pulley, instead of just relying on frictional contact to...

Hi everyone. Just a small, quick question I have: Can negative ions be accelerated by a Van de Graaff particle accelerator? My initial reaction is no, because the terminal (the sphere with the charges allocated on the outside) is positive, which means negative ions would be attracted and not...

Question: If you charge a capacitor circuit and then separate the capacitor, does voltage increase beyond the initial source? It seams counter intuitive that if you plug a 9 Volt battery into two metal plates and pull the plates apart that you'll get massive voltage spikes, but that's what the...

Good Evening/Morning/Afternoon Everyone, Question: Why is it that demonstrations of Van de Graff generators use Leyden Jars in series to get bigger sparks? If a spark gap's size determined by voltage, and Leyden jars are simply to be treated as capacitors which wouldn't increase voltage, why...

Homework Statement A pith ball is charged by contact with a Van De Graaff machine, and is repelled away from the dome. It remains at its location. Using the chart given, what is the mass of the pith ball? Distance between centre of generator and pith ball...

I know that current depends on the impedance and potential difference b/w two points so why does a van de graaff generator pose no serious shock hazard i.e. why the extremely low current between the generator and ground? As seen in this video demonstration the instructor safely touches the...

Hi. I have access to following Leybold Van de Graaff generator: The instructions and data sheet can be found here, but they don't give much insight. I have found different working principles of VdG generators. Some need the rising and falling sides of the belt to be closely together from top...

Homework Statement I did a lab involving Van de Graaff generator. Basically, below the charged sphere, I put a neutral sphere on a scale and measure the difference in mass which then I can calculate the force acting on the neutral sphere. I repeated the experiment with different distance. What...

I have been trying to build a small Van de Graaff generator based on the designs found here: http://rimstar.org/equip/build_make_van_de_graaff.htm Unfortunately I haven't been having much luck. How can I improve it...

Hi everyone, I am a little confused conceptually about electrostatic voltage and DC voltage. I did my bachelors in biochemistry (where I’m working today), I’m learning/relearning physics as a hobby. I did well in high school physics and first year physics but I’m afraid I’ve forgotten most of...

Is there any easy way to determine the charge on a van de graaff generator based on the voltage?

Homework Statement A fellow scientist heard that a Van de Graaff generator built 70 years ago could collect 5.0 C of charge on its dome, which had a radius of 1.1 m, and has challenged you to do the same. You plan to use the same dome with the same radius and the belt you plan to use is 200 mm...

If you run a wire from the outside surface of the dome to the inside of the same dome, would it be possible to make a spark to the inside surface of the same dome?

Hi all, I've been playing with a van de graaff this week. As I'm sure you know, pointing a nail at someone with their hair raised by the machine will result in the hair immediately sticking back down. I can easily imagine electrons flying off of the tip of the nail and into the hair of the...

Ok, so I'm building a Van De Graaff generator from parts I've been collecting for some time now. I have 2 hemispherical bowls that were supposed to line up perfectly to make the ball at the top. shipping has warped them just the slightest bit. I'm wondering if this will produce coronal leakage...

I know that van de graaff generator is a high voltage generator, i was wondering though if we can use it as a current source, if we get any resistor, connect the negative terminal to the generator "if the generator generates negative charge " then ground the positive terminal, then any charge...

Many sources talk about the field inensity (and therefore arcing/breakdown) on the outside of the dome as a limiting factor on the highest voltage that can be possibly reached on a VDG machine. There are also references to possible dielectric breakdown along the belt itself. I am wondering if...

I'm currently in a program to be a physics teacher and for an upcoming mock lesson plan I am going to show the scene from Jurassic Park where the kid gets blasted off the electric fence and talk about if it is realistic. To supplement my discussion I'll be using a Van de Graaff generator to...

My area of concern is C) and if I am correct in assuming it is like Faradays cage, but I am new to all this so I also put down A and B also. If you charge up a Van de Graaff Generator and then bring an identical but uncharged hollow conducting sphere near it, without letting the two spheres...

Hello~ I've got a confusing question; "If a Van de Graaff generator is charged to 50,000 volts, how much energy does it take to add an additional electron to the charge on the sphere?" (The charge of an electron is given as -1.6 x 10^{-19}C) My answer: (50,000 V)( -1.6 x 10^{-19}C) = 8.0 x...

Hello all, I have a quick, albeit probably ignorant (forgive me) question generated by (bu dum) observations of a van de graaff generator. In particular, two distinct scenarios caused me to question what was going on. Scenario 1 – I’m standing on a plastic stool, with one hand on the...

Hey guys, I'm new to this forum so I'm sorry if I posted in the wrong thread. So we did these experiments with van de graaff and I almost understood all of them except what seems to be "Franklin's wheel" experiment. I know for one thing that the air near the sharp points are ionized but I don't...

I am building one. Not for school but for personal reasons. Is anyone here familiar or has built one before? I have some questions such as can the collector be any size? The maxium voltage of the collector is generally .8(70000r) with r being the radius of the collector. I was wondering if...

my husband has a van de Graaff generator and one day he decided to bring it out and show me since i had never seen one. well after about 5 minutes of it running i could not even be in the same room as it while it was running because it caused me physical pain. now i want to know why did this...

When I place a metal bar near a Van de Graaff, which generate hugh amount of positive charges on its surface, if I hold it for a period of time, will it be possible to magnetize this metal bar? what happen to its internal molecula structure? Does anyone have any suggestions? Thanks in advance...

My physics book explains a van de Graaff in this way: A small conducting sphere of radius a and carrying charge q is located inside a larger shell of radius b that carries charge Q. A conducting path is momentarily established between the two conductors, and the charge q then moves entirely to...

Hi, Why do all the designs for a Van de graaff generator have a insulated belt that delivers charge? Couldn't I just connect the negative terminal of a battery to the inside and get the same effect? Van de graaf from wikipedia http://en.wikipedia.org/wiki/File:Van_de_graaf_generator.svg

I'm trying to charge a capacitor with a van de graaff generator. Where do I put the positive and negative nodes on a generator like this http://www.chrisbrenton.org/wp-content/uploads/2009/07/van-de-graff.jpg

Homework Statement I have to make a van de graaff generator for my physics class. Homework Equations The Attempt at a Solution I put it together and it doesn't work at all. Please help. Is the reason it isn't working is that i don't have a glass tube or something else? Homework Statement...

van de graaff accelerator -- do-able? (posted in the wrong forum -- apologies)

Sorry, I had a long post that just got eaten by my computer so I am having to re-type my question. It will need to be brief: Here is an example of a van de Graaff generator: http://hyperphysics.phy-astr.gsu.edu/hbase/electric/vandeg.html It notes that the bottom brush is "given a positive...

Hello all, In my first high school physics class my teacher performed an incredible demo that has stuck in my mind ever since. After playing around with a Van de Graaff generator a bit he whipped out one of those homemade plastic bottle and aluminum foil Leyden jars and charged it up using...

So I am in an intro E&M class and the topic of Van de Grraaff generators came up. The instructor said that when there is enough charge on the surface then there is corona discharge. But what would happen if the generator was in a vacuum? Then there would be no corona created. So would the amount...

First, let me say hello to everyone on the forums! A friend and I have converted a 36" CRT television into a HV source using its flyback transformer. We discharged the tube before taking anything else apart. We have the HV source attached to a thin wire, which causes the air around it to...

A Van de Graaff generator is charged so that a proton at its surface accelerates radially outward at 1.45 10^12 m/s2. Find the following. (a) the magnitude of the electric force on the proton at that instant magnitude (b) the magnitude and direction of the electric field at the surface of...

Hello, I work for a container factory where re-used bottles have a lot of tiny glass splinters. Inspired by the standard experiment of picking up glass splinters using a comb, I thought I could insert a charged rod into a bottle to attract little splinters towards it. To get similar voltages...

Van de Graaff generator? adding a electron?? Homework Statement A)If a Van de Graaff generator is charged to 5,000 volts, how much energy does it take to add and additional electron to the charge on the sphere? If the charge of an electron is -1.6 x 10 ^-19... B) How would the voltage...

I'm trying to build a simple Van De Graaff generator, for the first time. The problem is quite obvious - the current generated is zero. Can somebody help to find what is wrong? The column is a typical sewer pipe, axles are aluminum bars, electric screwdriver acts for motor. The upper...

Homework Statement A Van de Graaff generator is charged so that the electric field exerted at the top surface is 2.0× 10^6 N/C directed upwards. Find the a) the electric force exerted on a styrofoam peanut (q= 0.025μC) released at its surface, b) the gravitational force on the peanut, c) its...

Using a Van De Graaff (VDG) machine, we can easily generate million-volt high voltage. The high potential difference can be generated effectively with minimum energy supplied to the machine. The larger the volume of the machine would be, the higher the voltage could get. However, stability would...