i figured out the Qh and got 3.113x10^7 J but now it wants to know how much Energy E must be supplied to the engine, in joules. I know that E_int= Q+W but says im wrong... any help?
A Carnot heat engine uses a hot reservoir consisting of a large amount of boiling water and a cold reservoir consisting of a large tub of ice and water. In 5 minutes of operation of the engine, the heat rejected by the engine melts a mass of ice equal to 3.40×10^−2 kg.
Throughout this problem...
An ice-making machine inside a refrigerator operates in a Carnot cycle. It takes heat from liquid water at 0.0 C and rejects heat to a room at a temperature of 22.2 C. Suppose that liquid water with a mass of 86.2 kg at 0.0 C is converted to ice at the same temperature. Take the heat of fusion...
Water flows steadily from an open tank as shown in the figure.The elevation of point 1 is 10.0 meters, and the elevation of points 2 and 3 is 2.00 meters. The cross-sectional area at point 2 is 0.0480 square meters; at point 3, where the water is discharged, it is 0.0160 square meters. The...
Oscillation of a balanced object
moment of inertia about the end of a rod is (1/3)mL^2. The pivot point is where the ends of the two rods meet. So i dont understand what d is.
Oscillation of a Balanced Object
The moment is mL^2 for one rod, 2mL^2 for both. The center of mass of each rod is L/2. therefore d is L/2.
w= sqrt((2m*g*L/2)/(2mL^2))
I= (1/12)mL^2 but there are two so it would be (1/6)mL^2
Center of mass of the object is the moment of the L shape divided by the mass of the object. ((1/6)mL^2)/2m)?
Two identical thin rods, each of mass m and length L, are joined at right angles to form an L-shaped object. This object is balanced on top of a sharp edge. If the object is displaced slightly, it oscillates. Assume that the magnitude of the acceleration due to gravity is g.
Find omega, the...