Net Work Done: Solve Force Question Homework

  • Thread starter Thread starter inflames829
  • Start date Start date
  • Tags Tags
    Force
AI Thread Summary
The discussion revolves around calculating the net work done on an object subjected to a force and friction. The force exerted is F = -4.3i + 2.0j + 1.5k Newtons, and the displacement is d = -0.8i + 1.8j - 3.6k meters. The initial calculation of work done by the force yielded 1.64 J, while the work done by friction was incorrectly calculated as 0, leading to confusion. It was clarified that the friction force of -0.2 N can be used in the work equation, resulting in an additional work of -0.82 J. The net work done is then calculated by combining both work values, but discrepancies in the final answer prompted requests for further assistance.
inflames829
Messages
40
Reaction score
0

Homework Statement


A force F=-4.3i+2.0j+1.5k Newtons exerts a displacement of d=-0.8i+1.8j+-3.6k metres upon a small (ie mass is negligible) object. If the friction force is equal to Ffr=-0.2,, then what is the net work done upon the object?


Homework Equations





The Attempt at a Solution


I know the net work is the sum of all the individual work and the work equation is W=F.D. So i tried to work out the work of the initial force stated by multiplying the force and displacement stated which i got 1.64J. I think the only other work is caused by the friction force but when i try to work that out (because the mass is negligable) i get 0. Can someone please help?
 
Physics news on Phys.org
Mass is negligible only affects calculating the friction force using \mu N, but you already have the friction force. What can you do with it?
 
could i put it as the force in the work equation and put the distance as the displacement that's stated in the question?
 
Yes.
 
so i have 1.64 from the first force i worked out and if i put the friction force into the work equation w= -0.2 x D i get -0.82. If I add the two works i have i get 0.82, but the answer is 1.3... can you give me hints on what I've done wrong??
 
I get that also. From where did you get this problem?
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Trying to understand the logic behind adding vectors with an angle between them'
My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...
Back
Top