A light, readily available glue, that can adhere metal to latex.

  • Context: LaTeX 
  • Thread starter Thread starter DragonPetter
  • Start date Start date
  • Tags Tags
    Latex Light Metal
Click For Summary
SUMMARY

The discussion focuses on finding a lightweight adhesive suitable for bonding metal to latex or rubber-like materials. Recommended adhesives include cyanoacrylate (Super Glue), two-part epoxy resins like Bondo, PC-7, and PC-11, which are readily available at hardware stores. For a fine layer application, using a two-part automotive paint with an HVLP gun is suggested. Additionally, UV-catalyzed polymer resins are mentioned for transparent layers, while Liquid Nails and JB Weld are options for stronger bonds.

PREREQUISITES
  • Understanding of adhesive properties and applications
  • Familiarity with cyanoacrylate and epoxy resin types
  • Knowledge of spray application techniques using HVLP guns
  • Basic principles of UV-catalyzed polymer resins
NEXT STEPS
  • Research the properties and applications of cyanoacrylate adhesives
  • Explore different types of two-part epoxy resins and their uses
  • Learn about HVLP spray techniques for adhesive application
  • Investigate UV-catalyzed polymer resins and their bonding capabilities
USEFUL FOR

This discussion is beneficial for hobbyists, DIY enthusiasts, and professionals in fields such as crafting, automotive repair, and materials science who are looking for effective bonding solutions for metal and latex materials.

DragonPetter
Messages
830
Reaction score
1
Hello,

I have next to no materials specific knowledge, so I was hoping someone here could guide me in the right direction.

I'm looking for a spreadable adhesive that has the following properties listed by priority:
1. Can adhere metal to latex or other rubber-like materials.
2. Inexpensive
3. Is very light when dried.
4. Good surface tension when uncured/dried
5. Readily available at a store or easy to purchase in small quantities online.


Strength (holding force?) is not that important, if that is a factor.
 
Physics news on Phys.org
you sound like a chemical engineer to me, could you please give me reasons for studying chemical engineering other than the passion for chemistry, physics and maths?? thanksssss
xxx :)
 
the_day_angel said:
you sound like a chemical engineer to me
Actually, I implied the opposite when I expressed my lack of materials knowledge.
 
Cyanoacrylate?

aka Super Glue.
 
2 part expoxy resin - not sure about the chemical bonds etc but I have used it for anumber of my projects
 
yep a two part epoxy like Bondo or PC-7 or PC-11 may work. you canget those at any hardware store

If it needs to be a fine even layer of adhesive you can use a cheap 2 part automotive paint and spray it on with an HVLP gun between your layers

ever hear of A UV-catalyzed polymer resin? if one of the layers you are gluing together is transparent you could use something like a photo-catalyzation process rather than an epoxide type scenario
 
I did not see if you needed it to be flexible.
Another factor is surface area, the larger the area the less adhesion
you need for the same strength.
If you do not need flex, liquid nails will have something that should work.
If your part needs some strength, JB Weld. (I repaired an outboard engine block with this)
 

Similar threads

Chemically regenerating my auto's catalytic converter?
  • · Replies 19 ·
Replies
19
Views
9K
Do Movies Teach Us Realistic Life Skills?
  • · Replies 1 ·
Replies
1
Views
10K