A question about a computation in a paper of Effective Lagrangian

Click For Summary
The discussion revolves around difficulties in deriving specific terms from an equation in a paper on Effective Lagrangian theory. Participants are trying to reconcile the terms involving Majorana fermions and their conjugates, particularly focusing on the kinetic terms and the proper treatment of the degrees of freedom. There is an emphasis on the need for symmetry in the expressions and the correct application of identities to simplify the calculations. Additionally, the conversation touches on integrating out heavy degrees of freedom to derive an effective Lagrangian. The exchange highlights the complexities of the computations and the importance of maintaining consistency in notation and approach.
Breo
Messages
176
Reaction score
0
I was hitting against a wall for the last hours.

I am not able to obtain the 1/2 terms in the eq. 5 of this paper and left all in terms of only ##N_i## and ##\overline{N_i}##,neither. Anyone could give me a tip?

http://arxiv.org/pdf/hep-ph/0210271v2.pdf

Thank you in advance.
 
Last edited:
Physics news on Phys.org
I assume you mean from eq 3? Remember that ##N## and ##\bar N## contain both ##N_R## and ##N_R^c##.
 
I took that in consideration:

## N_{R_i} = \sqrt{\eta^*}N_i - \eta^*N_{R_i}^c ## and ## N_{R_i}^c = \sqrt{\eta}N_i - \eta N_{R_i}##

And the conjugate ones which change ## \eta^* \longrightarrow \eta ## and viceversa.

Right?

But still do not reach the eq (5) :s
 
Can you show your attempt? It is difficult to see what you are doing otherwise.
 
Starting with the derivative term:

##i(\sqrt{\eta}\overline{N_i} - \eta\overline{N_{R_i}^c}) \not\partial(\sqrt{\eta^*}N_i - \eta^*N_{R_i}^c) = i(\overline{N_i}\not\partial N_i - \sqrt{\eta^*}\overline{N_i} \not\partial N_{R_i}^c - \sqrt{\eta}\overline{N_{R_i}^c}\not\partial N_i + \overline{N_{R_i}^c}\not\partial N_{R_i}^c )##

Equalities: ##\sqrt{\eta}\sqrt{\eta^*} = \eta\eta^* = 1 ## and ## \sqrt{\eta}\eta^* = \sqrt{\eta^*}## and ## \eta\sqrt{\eta^*} = \sqrt{\eta}##

But I can not reach a 1/2 and also if I try to go further the whole term vanishes! I did something wrong
 
Why don't you try it the other way around?
 
Breo said:
I took that in consideration:

## N_{R_i} = \sqrt{\eta^*}N_i - \eta^*N_{R_i}^c ## and ## N_{R_i}^c = \sqrt{\eta}N_i - \eta N_{R_i}##

You are here essentially writing ##z = w - z^*##. This is not a way to remove ##z## from your equations in favour of ##w##. Remember that ##N_{R_i}## and ##N_{R_i}^c## contain the same degrees of freedom! Your final expression should contain neither ##N_{R_i}## nor its conjugate.
 
Why don't you try it the other way around?

I can see what do you mean. That would be very "direct" but I should be able to compute it using the way I tried, right?
 
Last edited:
Breo said:
I can see what do you mean. That would be very "direct" but I should be able to compute it using the way I tried, right?
No, you first need to write the kinetic term in a way that is symmetric wrt ##N_R## and ##N_R^c##, or you will have to use some identities at some point.
 
  • #10
Orodruin said:
No, you first need to write the kinetic term in a way that is symmetric wrt ##N_R## and ##N_R^c##, or you will have to use some identities at some point.

Sorry, I was replying to Chris :P

You mean to consider Majorana Fermions so play with ## N_{R_i} = N_{R_i}^c ## ? in the most convenient way?
 
  • #11
Breo said:
You mean to consider Majorana Fermions so play with ## N_{R_i} = N_{R_i}^c ## ? in the most convenient way?

No you cannot do that. They are not the same in the notation used in the paper. If I remember correctly, the paper uses Dirac notation for Majorana particles, i.e., ##P_L N_R = 0## and ##P_R N_R^c = 0##. You need to use other ways to rewrite the kinetic term in two.
 
  • #12
Orodruin said:
No you cannot do that. They are not the same in the notation used in the paper. If I remember correctly, the paper uses Dirac notation for Majorana particles, i.e., ##P_L N_R = 0## and ##P_R N_R^c = 0##. You need to use other ways to rewrite the kinetic term in two.

Can I compute in momentum space and then comeback to position space again freely? Or there is a way to split the ordinary derivative once for right-handed and once for left-handed interactions? if I understood correctly
 
  • #13
The Weyl equations?
 
  • #14
Try transposing (half of) the kinetic term. It is a scalar and should remain the same. Then use partial integration.
 
  • #15
I have doubts if I can do the following as the mass terms would have free ##N_R ## and ## \overline{N_R}## while integrating:

## \frac{1}{2} i (\overline{N_R}\overset{\leftarrow}{\not{\partial}} +\overset{\rightarrow}{\not{\partial}}N_R) ##

So, since ##N_R## and ## N_R^C ## have the same degrees of freedom, could I decompose the kinetic term as follows?:

## \frac{1}{2} i (\overline{N_R^c}\not{\partial}N_R^c + \overline{N_R}\not{\partial}N_R) ##
 
  • #16
Breo said:
could I decompose the kinetic term as follows?
Yes. It simplifies to
##
\frac 12 \overline N i \not\partial N
##
 
  • Like
Likes Breo
  • #17
Thank you very much!

Now the last doubt I have about the computations is what allows me to put the propagator in the action (eq.11) and what to remove the kinetic part.
 
  • #18
Are you familiar with how to integrate out heavy degrees of freedom?
 
  • #19
Orodruin said:
Are you familiar with how to integrate out heavy degrees of freedom?

I have read something about heavy particles in effective lagrangians. Briefly, looks like this but not at all as it uses fluctuation operators(=propagators?) which formula is as follows:

## \frac{\delta^2 S_{heavy}}{\delta h(x) \delta h (x')} |_{h=h_o} ## you mean smoething about that?
 
  • #20
At tree level, which is essentially all you need here, it is basically inserting the classical equations of motion for the field into the Lagrangian to remove the heavy degrees of freedom and obtain an effective Lagrangian. This is what they do if I remember correctly.
 
  • Like
Likes Breo

Similar threads

  • · Replies 2 ·
Replies
2
Views
1K
Replies
1
Views
3K
Replies
2
Views
6K
Replies
7
Views
2K
  • · Replies 7 ·
Replies
7
Views
3K
  • · Replies 1 ·
Replies
1
Views
1K
  • · Replies 8 ·
Replies
8
Views
3K
  • · Replies 30 ·
2
Replies
30
Views
7K
  • · Replies 1 ·
Replies
1
Views
492
  • · Replies 4 ·
Replies
4
Views
3K