Difference between propellers and rotors in aircraft design

  • Thread starter Thread starter mtworkowski@o
  • Start date Start date
  • Tags Tags
    Propeller Rotor
Join the discussion
Registration is free. Ask a follow-up in this thread, or start your own.
Sign up Log in
7 replies · 12K views
mtworkowski@o
Messages
213
Reaction score
0
I was thinking about the difference between the appearance of a propeller on a plane and a rotor on a helicopter. What is the consensus?
 

Discussion

Physics news on Phys.org
Two different things that live on two separate worlds. They are only similar in appearance and the fact that they move air. What exactly is it you are wondering about?
 
I'm thinking these things look different because they're doing different things. I know a propeller is moving air horizontally, but is a copter blade shaped that way because centrifugal force is holding it out?
 
If you are referring to their droop while stationary, then you are correct. Because they have such large aspect ratios, to make a rotor blade stiff like a prop you would have to make it extremely thick ad heavy. It would be completely impractical.
 
I'm also not seeing the twist that I see on a prop. I know that collective/cyclic controll needs that compromise but is that the reason the twist is not there?
 
mtworkowski@o said:
I'm also not seeing the twist that I see on a prop. I know that collective/cyclic controll needs that compromise but is that the reason the twist is not there?

HAH! Good observation. I never noticed that until your post!

Its probably because the change in speed due to RPM is much lower than a prop from center to blade tip. -but that's just a guess.
 
I'll buy that!
 
mtworkowski@o said:
I'm also not seeing the twist that I see on a prop. I know that collective/cyclic controll needs that compromise but is that the reason the twist is not there?
There is a slight twist in helicopter blades, but not a huge twist like in a prop. For example, my beloved Chinook has a negative 12° twist towards the tips. The twist is there to accommodate the large length of the rotor and the resulting change in lift as you go from the hub to the tip. A prop is less like a real wing than a rotor blade. A prop, while can be feathered and adjusted, is less adjustable than a rotor blade which is why there is a huge twist in them, to get the max thrust they can get in their design condition. That is why a helicopter is a rotary-wing aircraft and not a prop driven aircraft.
 
Last edited: