Examine the following circuit and complete the table

2 replies · 3K views · last reply
joshua cruwys
Messages
4
Reaction score
0
Moved from a technical forum, so homework template missing
so for resistance I've gotten r1=6 r2=5 r3=8 and r4=12. then for current i got r1-.30 r2=.24 r3=.06 r4=.06 amd volatge r1=1.8 r2=1.2 r3=.48 r4=.72. I am not sure about my voltage for r3 what i did was Vt-r1-r4 and when i add them up i get 3v so that should be right? and I am also not sure about resistance total or my r3 for my r3 i did...
R3=V3/I3=.48V/.06A=8 is all my information right?
 
Attachments
  • Hand-drawn circuit schematic with a battery on the left, resistors labelled R1=6 Ω, R2=5 Ω, R3 and R4=12 Ω, with R3 marked with a question mark, and a blank table below with rows for total, resistors 1 to 4 and columns for resistance, current and voltage.
    ATT00001 (8).jpg
    13.1 KB · Views: 684
joshua cruwys said:
so for resistance I've gotten r1=6 r2=5 r3=8 and r4=12. then for current i got r1-.30 r2=.24 r3=.06 r4=.06 amd volatge r1=1.8 r2=1.2 r3=.48 r4=.72. I am not sure about my voltage for r3 what i did was Vt-r1-r4 and when i add them up i get 3v so that should be right? and I am also not sure about resistance total or my r3 for my r3 i did...
R3=V3/I3=.48V/.06A=8 is all my information right?
Yikes, I tried processing your image, and it's still really hard for me to read... Can you say in words what it shows?

Handwritten circuit schematic on lined paper: a battery on the left with 0.3A labelled, R1 = 6 ohm, 0.2A label, R2 = 5 ohm, R3 = ?, R4 = 12 ohm, above a blank table with columns Resistance (ohm), Current (A), Voltage (V) and rows Total, Resistor 1, Resistor 2, Resistor 3, Resistor 4.
 
joshua cruwys said:
is all my information right?
We need to know what data the problem came with. It is difficult to tell the difference between what you were given and what you have calculated.