Finding ammeter current with three resistors and Kirchhoff's rules

  • Thread starter kaspis245
  • Start date
  • Tags Tags
    Current
4 replies · 2K views · last reply
kaspis245
Messages
189
Reaction score
1

Homework Statement


There is a circuit which is shown in the picture. ##R_1=10 Ω;## ##R_2=10 Ω;## ##R_3=30 Ω##.
I need to find what ampermeter is showing.
Circuit diagram: terminals A and C on top connected through resistors R1 and R2 in series via node E; R3 runs from E down to node F on the bottom wire between B and D; an ammeter A sits in the bottom wire; source labelled 80 V on the left.


Homework Equations


U=IR

The Attempt at a Solution


Circuit diagram: 80 V source across terminals A-B and C-D with resistors R1 and R2 in series on the upper branch, R3 vertical from junction E to F, and an ammeter A on the lower wire between B and F; currents I1, I2 and I3 are marked.

I am trying to use kirchhoff rules here.

##I_1=I_2+I_3##
##I_1R_1+I_3R_3=80##
##I_2R_2=I_3R_3##

I get that ##I_3=1.14A##. Is this correct?
 
Assuming C & D are open as shown, I2 should be 0.
 
  • Like
Likes   Reactions: CWatters
But how do I know whether there is voltage between C and D? It is not stated in the problem. In fact, the next question of this problem asks to find the voltage between C & D.
 
There will be a voltage between C and D, even though I2 = 0.
 
kaspis245 said:
I am trying to use kirchhoff rules here.
snip
I2R2=I3R3

That last line isn't correct. The voltage across R2 and R3 are not the same.

There is nothing connected to C and D so no current flows into or out of C and D. So I2 = 0. Think what that means for I1 and I3.