Finding i(t) using Laplace transform for a circuit with switch opening at t=0

10 replies · 2K views · last reply
ranju
Messages
221
Reaction score
3

Homework Statement


we have to solve the given circuit using laplace transform for i(t) for t>0 when switch k opened at t=0..
now all I wnated to make clear is the final circuit diagram of this in s-domain..[/B]

Homework Equations

The Attempt at a Solution


as I solved I considered the circuit to be in steady state before switch is opened so , current across inductor is 6A...[/B]
 
Attachments
  • Circuit schematic with a 12V source on the left, a 2 ohm resistor and a 1 H inductor in parallel branches, a switch K labelled t=0, and a second 2 ohm resistor feeding a 16V source on the right.
    IMG_20141007_181238.jpg
    42.9 KB · Views: 482
  • Hand-drawn s-domain circuit: a voltage source on the left in series with a 2 ohm resistor, then an inductor labelled 1xS = 1S, and a current source labelled L I(0+) = 1x6 in the right branch; loop current I(s) shown.
    IMG_20141007_181609.jpg
    40.5 KB · Views: 496
well only the left hand portion is'nt clear.. in 1st pic.. there is 12V voltage source & in 2nd pic it is 12/s in s-domain..
i(0+)=i(0-) = 6A..
 
sorry actually I did a calculation mistake..i(0-) =4 A.. and I found the equivalent current of the circuit considering it in steady state before switch is opened.. so the inductor is dhorted so the whole 4 A current pass across the inductor branch..!
 
Are you sure the current will be 4 A,mine is coming 14 A.
 
thanks and additional thanks for correcting that mistake.. :p