Stargazing How Did You Capture the Mars Occultation? Share Your Photos Here!

  • Thread starter Thread starter russ_watters
  • Start date Start date
  • Tags Tags
    Mars
Click For Summary
The discussion focuses on capturing the Mars occultation, with users sharing their imaging setups and techniques. One participant is using a C11 telescope with a 0.33 focal reducer and a ZWO ASI1600 monochrome camera to photograph the event. They plan to capture the "in" and "out" phases of the occultation using different cameras for optimal detail. The imaging process involves stacking thousands of frames to reduce atmospheric distortion, though this can lead to smearing due to the movement of Mars and the Moon. The final image is a composite, combining separately processed frames for clarity and detail.
russ_watters
Mentor
Insights Author
Messages
23,731
Reaction score
11,175
TL;DR
Observation of the Jan 13, 2025 Mars Occultation
Post your pics of the Mars occultation here!

Currently it's 8:20 EST, about an hour from the occultation. Below is a still of what I'm working on (the gray dot near the right side is Mars):

Still 2025-01-13 201746.jpg


I'm using my C11, a 0.33 focal reducer and currently using a ZWO ASI1600 monochrome camera. It's the only setup with which I can shoot the entire moon with the C11. I'm going to shoot the "in" with this setup and the "out" at higher magnification and a color camera. The color camera has a much smaller sensor and pixels so it can't image the entire moon even with the focal reducer.

Zommed-in on Mars:

2025-01-14-0058_9-U-R-Mars_1.png


This is a 3,000 frame stack. Seeing isn't very good, so there isn't much detail to be had.
 
Last edited:
Astronomy news on Phys.org
Well this ended up better than expected!

Moon-Mars-2024-01-13.jpg
 
Reply
  • Like
Likes Nugatory, glappkaeft, berkeman and 4 others
Incredible photo, looks like a composite.
 
Ken G said:
Incredible photo, looks like a composite.
It sort of is. It's not a single frame; to take high-res photos through the atmosphere you take thousands of photos and stack them, which cancels-out the atmospheric distortion. But because the Moon and Mars are moving relative to each other, stacking photos will smear one or the other. So they have to be processed separately and then re-combined, from one or a set of massive video file(s). But it is the same camera, same settings, about the same time, and the separately processed Mars is pasted over a smeared version of itself.
 
Reply
  • Like
Likes Ken G and Ibix

Thread 'Project Progress Report and possible Radio Astronomy Technique?'

Some 8 years ago I posted some experiments using 2 Software Defined Radios slaved to a common clock. The idea was measure small thermal noise by making correlation measurements between the IQ samples from each radio. This is a project that has kinda smoldered in the background where I've made progress in fits and starts. Since most (all?) RA signals are small thermal signals it seemed like the technique should be a natural approach. A recent thread discussing the feasibility of using SDRs to...
View full post »

Similar threads

What Challenges Did I Face in Capturing Images of the Andromeda Galaxy and Mars?
Replies
0
Views
2K
B Infrared Detectors & The 2nd Law of Thermodynamics
4
Replies
152
Views
10K