Is my solution for this equilibrium problem correct?

4 replies · 2K views · last reply
Tapias5000
Messages
46
Reaction score
10
Homework Statement
Determine the force required on each cable to sustain the load of 500lb
Relevant Equations
Σfx=0, Σfy=0, Σfz=0
Diagram of a 3D statics problem: a box hangs from point C supported by cables running to anchors D, B and A, with dimensions 16 pies, 12 pies and 4 pies labelled on the axes.

I tried to solve it and I got the following, is it correct?
Handwritten-style typeset solution to a statics problem: vector cable tensions T_CA, T_CD and T_CB written as unit vectors, force equilibrium equations, and final values T_CD = 625 and T_CB = 197.72 and T_CA = 197.72.
 
Looks ok.

Insofar as 2 of the cables are in the horizontal plane, then the 500 pound vertical load must all be carried by the vertical comp of cable CD. And with that 3-4-5 triangle, 3 fourths of it or 375 pounds , must go horizontally to the other 2 cables, and their being symmetric, that’s half again or 187.5 borizontally to each, or cable tension root 10/3 times that. Saves a few lines. At least on this one.
 
PhanthomJay said:
Looks ok.

Insofar as 2 of the cables are in the horizontal plane, then the 500 pound vertical load must all be carried by the vertical comp of cable CD. And with that 3-4-5 triangle, 3 fourths of it or 375 pounds , must go horizontally to the other 2 cables, and their being symmetric, that’s half again or 187.5 borizontally to each, or cable tension root 10/3 times that. Saves a few lines. At least on this one.
Are my answers correct?
 
haruspex said:
Near enough. I get 197.64...
ooh... maybe then only decimals are involved in the procedure... well I'll settle for that