Low-Cost Data Acquisition Systems for PocketPC & WinCE

[MednataMiza]

Hi !
Happy New Year !
Now to the question :)
I am looking for a cheap DAQ for my PocketPC 2003 Toshiba e805 or for WinCE 4.2 NEC Mobilepro 900c. Eventually the DAQ can be a PCI board.
The Toshiba accpets CF I/II cards and the NEC - CF I/II and PCMCIA cards.
Every suggestion, opinion, etc is welcome !
Also if someone can recommend an online retailer - feel free to share !


Thanks !

 

[Routaran]

i would contact the manufacturer of the instrument that you are taking measurements from to see if it has an option for PCMCIA.

 

[MisterX]

http://www.ebay.com/itm/National-Instruments-DAQCard-6036E-BRAND-NEW-SEALED-NI-DAQ-Software-/300598259336?pt=LH_DefaultDomain_0&hash=item45fd0d6e88

The price was $445 at ebay. NI seemed to be selling PCMCIA cards for over $1000.

This table of supported devices for DAQmx software doesn't have column for Windows CE, but DAQmx software itself does have a Windows CE version. It might be wise to contact NI or do further research before buying, to make sure the device is supported on your operating system.

 

[MisterX]

i would contact the manufacturer of the instrument that you are taking measurements from to see if it has an option for PCMCIA.

PCMCIA and Windows CE drivers?

 

[MednataMiza]

i would contact the manufacturer of the instrument that you are taking measurements from to see if it has an option for PCMCIA.

That is the problem :) I have the device that logs the data, but not the sensors :)
MisterX - Thank you ! But ebay was the first place I went through :)