Multiphase flow with high Mach number

  • Thread starter Thread starter Raj Kiran
  • Start date Start date
  • Tags Tags
    Flow Mach
AI Thread Summary
The discussion focuses on multiphase flow in pipes at high Mach numbers, specifically in the range of 0.3 to over 1, with an emphasis on accident analysis. Participants highlight the importance of considering choked flow conditions during pipe ruptures, where liquid can flash to steam in transient situations. Several references on transonic two-phase flow are mentioned, although many require paid access. A specific white paper from a private company on transonic flow is provided as a resource. The user is seeking additional links for accessing relevant papers and articles on the topic.
Raj Kiran
Messages
3
Reaction score
0
Hello everyone
I am currently working on multiphase flow in pipe. Will you guys suggest any reference for multiphase flow in pipe with high Mach number (Experiment and Simulation)?
Thanks in Advance.
 
Engineering news on Phys.org
Raj Kiran said:
Hello everyone
I am currently working on multiphase flow in pipe. Will you guys suggest any reference for multiphase flow in pipe with high Mach number (Experiment and Simulation)?
Thanks in Advance.
What range of Mach numbers is one considering? Is this state for steady-state application or accident analysis?

For a pipe or vessel rupture under high pressure, one must consider a chocked flow as liquid flashes to steam, but that is a transient situation.

There are many papers on transonic two phase flow, but they require subscription or paid access.

At least on private company has produced a white paper on transonic flow.
http://fisonicsolutions.com/Resources/FISONIC WHITE PAPER 2010.pdf
 
  • Like
Likes Raj Kiran
Astronuc said:
What range of Mach numbers is one considering? Is this state for steady-state application or accident analysis?

For a pipe or vessel rupture under high pressure, one must consider a chocked flow as liquid flashes to steam, but that is a transient situation.

There are many papers on transonic two phase flow, but they require subscription or paid access.

At least on private company has produced a white paper on transonic flow.
http://fisonicsolutions.com/Resources/FISONIC WHITE PAPER 2010.pdf
Thank you, Sir. Will you please send the links where I can subscribe and get such papers/articles?
 
The Mach number that I am considering is 0.3-1+. Also, it is more in terms of accident analysis. Please suggest the websites/links.
Thanks
 

Thread 'MCNP6 BURN Card Issue: Zero Burnup for Material in Fuel Assembly'

Hello everyone, I am currently working on a burnup calculation for a fuel assembly with repeated geometric structures using MCNP6. I have defined two materials (Material 1 and Material 2) which are actually the same material but located in different positions. However, after running the calculation with the BURN card, I am encountering an issue where all burnup information（power fraction(Initial input is 1,but output file is 0), burnup, mass, etc.） for Material 2 is zero, while Material 1...
View full post »

Similar threads

Intuitive explanation of Fanno Flow
Replies
2
Views
2K
Calculating drag for high mach numbers
Replies
4
Views
2K
A Flow in Porous Media and Granular Beds
Replies
6
Views
1K
Dynamic Link Library (dll) and Compaq Visual Fortran 6.6
Replies
1
Views
618
How to determine mdot for choked airflow through a valve, given T,P
Replies
3
Views
2K
How do we model water flow problems?
Replies
14
Views
2K
A Adiabatic Compressible Flow in a Converging Duct
Replies
6
Views
2K
Pressure profile of a gas flow through an orifice
Replies
10
Views
6K
Increasing pipe size and then decreasing
Replies
2
Views
3K
Reynolds number & Mach number for flow regime
Replies
6
Views
2K

Hot Threads

Recent Insights

Back
Top