Rabbit vs. Tortoise: A 100-m Race

  • Thread starter Thread starter huong03
  • Start date Start date
  • Tags Tags
    Race
Click For Summary
In a 100-meter race between a rabbit and a tortoise, the tortoise moves at a constant speed of 10 cm/s, taking 1000 seconds to finish. The rabbit, after a 16-minute nap, accelerates at 0.15 m/s² and actually completes the race in approximately 996.5 seconds, winning despite the nap. The discussion also clarifies the correct formulas for average velocity and average speed, confirming their definitions. Additionally, if the rabbit had only napped for 15 minutes, a specific acceleration would be required for a tie. Overall, the rabbit's nap and acceleration strategy ultimately led to its victory.
huong03
Messages
1
Reaction score
0
1. A rabbit and a tortoise compete in a 100 meter race. The tortoise moves at a uniform speed of 10 cm/s. The rabbit took a nap for 16 minutes. After the rabbit wake up, he accelerates at a uniform rate of 0.15 m/s^2.
a) Draw a time vs. velocity of the motion of the tortoise and the rabbit? (I'm clueless!)
b) How long does it take for the tortoise to complete the race?
(It takes the tortoise 1000 seconds to win the 100 meter race, right?)
c) How far has the rabbit moved at this time?
d) Who won the race? The tortoise, right? but why?
e) If the rabbit had taken a 15 minutes nap instead, what is his required acceleration for the race to be tie?

2. Is the following formula right?
a) average velocity = (vector)/time

b) average speed = lmagnitudel/ time

Please help, thanks.
 
Last edited:
Physics news on Phys.org
Use formula
s=ut+\frac{1}{2}at^2
s_{tortoise}=0.10t
s_{rabbit}=\left\{\begin{array}{cc}0,&amp;\mbox{if}\ t&lt;\ 960\ s\\<br /> \frac{1}{2}*0.15*(t-960)^2, &amp;\mbox{if}\ t\geq\ 960 s\end{array}\right
v_{tortoise}\frac{ds_{tortoise}}{dt}=0.10
v_{rabbit}=\frac{ds_{rabbit}}{dt}=0.075*(t-960)^2\ for\ t\ \geq\ 960 s
You have got your part (b) correct.
Substitute t=1000 s into the 3rd equation to get 120 m.
Substitute s_{rabbit}=100\ m \ to \ find \ the\ time\ t\ taken\ by\ the \ rabbit\\<br /> \ to\ reach\ 100\ m \ to\ get \ t=996.5 \ s.
Unfortunately, the rabbit won the race.
Part (d)
s_{rabbit}=\left\{\begin{array}{cc}0,&amp;\mbox{if}t&lt;\ 900 s\\ \frac{1}{2}*a*(t-900)^2, &amp; \mbox{if} t\geq\ 900 s\end{array}\right
Substitute t=1000 s, time taken by the tortoise to finish the race = time taken for tie to happen, and s=100 m to get the answer.

Convert anything into SI units first. Initial velocity, u, for the rabbit is 0 because it starts from rest.

Can't help you with the next question, not clear enough...
 

Attachments

  • Explain.gif
    Explain.gif
    1.6 KB · Views: 526
Mistake Correction

v_{rabbit}=\frac{ds_{rabbit}}{dt}=\frac{1}{2}*0.15*2*(t-960) = 0.15t-144\ for\ t\ \geq\ 960 s

The graph is attached.
 

Attachments

  • Explain.gif
    Explain.gif
    1.6 KB · Views: 572
Thread 'Correct statement about size of wire to produce larger extension'
The answer is (B) but I don't really understand why. Based on formula of Young Modulus: $$x=\frac{FL}{AE}$$ The second wire made of the same material so it means they have same Young Modulus. Larger extension means larger value of ##x## so to get larger value of ##x## we can increase ##F## and ##L## and decrease ##A## I am not sure whether there is change in ##F## for first and second wire so I will just assume ##F## does not change. It leaves (B) and (C) as possible options so why is (C)...

Similar threads

  • · Replies 10 ·
Replies
10
Views
8K
  • · Replies 1 ·
Replies
1
Views
3K
  • · Replies 2 ·
Replies
2
Views
2K
Replies
2
Views
2K
Replies
1
Views
5K
  • · Replies 1 ·
Replies
1
Views
4K
Replies
4
Views
4K
  • · Replies 3 ·
Replies
3
Views
8K
  • · Replies 1 ·
Replies
1
Views
6K
  • · Replies 1 ·
Replies
1
Views
2K