Spin forming of magnesium alloys ?

[Nik_2213]

{ This is a world-building query, not home-work. }

Do any magnesium alloys have sufficient ductility for spin forming ?

Assume passive atmosphere, wheel-type low-friction tooling, optional heating etc...

 

[Baluncore]

Do any magnesium alloys have sufficient ductility for spin forming ?

Yes, several magnesium alloys possess sufficient ductility for spin forming, but they generally require heat-assisted processing (hot spin forming) rather than cold processing. Typical alloys are AZ31, AZ80, AZ80+, ZK60 / ZK61.
https://www.sciencedirect.com/science/article/abs/pii/S0924013605002281

Spin forming below 250°C usually results in localized thinning or immediate macroscopic fracture. Thermal assistance using gas burners or embedded induction heaters to stabilize the metal between 250°C and 400°C is mandatory to prevent brittle failure.

 

[Nik_2213]

Thank You, Thank You !!
Although the referenced article was pay-walled, Google Scholar search found related 'open' PDF:
Tube spinning process: Recent advances and challenges
Journal of Advanced Manufacturing Science and Technology 4(4) (2024) 2024014
https://www.sciopen.com/local/article_pdf/10.51393/j.jamst.2024014.pdf
--
Tangential to this PDF, I've also found much related background on 'Friction Stir Welding' of magnesium alloys, so have a much more robust 'take' on production processes available to that alien 'World Build'.