The shock required to detonate C4

  • Thread starter Thread starter fawk3s
  • Start date Start date
  • Tags Tags
    Shock
AI Thread Summary
C4 requires a significant shock to detonate, typically needing a pressure of 1 to 4 GPa. The shockwave must exceed the speed of sound in C4 to initiate detonation, and it is generally triggered using a blasting cap rather than direct electrical current. C4 is highly stable and can withstand considerable physical force, such as being struck or burned, without detonating. Thermal shock can also cause detonation in some explosives, but the specifics for C4 remain unclear. Overall, the consensus emphasizes the importance of a proper blasting cap for safe and effective detonation.
fawk3s
Messages
341
Reaction score
1
Hi,

I need to know how much shock is needed to detonate a C4 plastic explosive for my report in chemistry. I searched for it, but I didnt find a certain number. Somewhere I read it's about 4900 m/s of detonation velocity needed to create the shock, but it was from a source I wouldn't trust. As I understand, the shock/detonation velocity of the blasting cap needs to be over the speed of sound in C4 in order to create that shockwave. So I guess it would be nice to know the speed of sound in C4 aswell.

Also, I've heard from several sources that high current through C4 can detonate it? Is this true?

Thanks in advance
 
Physics news on Phys.org
The only way I know of how to blow up C4 is though a blasting cap. You can hook up and electrical switch t the blasting cap to set the blasting cap off then the C4. I would say the min would be what the blasting cap can do, C4 is extreamly stable you can even set it on fire and stomp on it with no problems.
 
Your post doesn't help me. Please read my original post again and see what I have requested for.
 
I have read it several times
and I also don't really know what else you want
Megaman gave you good info

I don't know about hi current, its always been blasting caps
as commented earlier C4 is very stable, you can even strike it hard with a hammer

I only learned these thing through onsite education from a blasing technician in a mine site

so do you want to elaborate a bit ?

Dave
 
You are looking at something in the range of 1 to 4 GPa of pressure before detonation of C4.
 
256bits said:
You are looking at something in the range of 1 to 4 GPa of pressure before detonation of C4.

Is it a matter of pressure? I assumed it was a shock which supplied simultaneous pressure and heat. If you put some in a hydraulic press I don't think it will detonate at any pressure. Or am I wrong?
 
Antiphon said:
If you put some in a hydraulic press I don't think it will detonate at any pressure. Or am I wrong?

from my understanding that is true. its the shock factor


Im not even going to risk googling such info... with the paranoia in the world today,
I wouldn't be suprised to have federal police knocking on my door in quick time

Dave
 
davenn said:
I have read it several times
and I also don't really know what else you want
Megaman gave you good info

I don't know about hi current, its always been blasting caps
as commented earlier C4 is very stable, you can even strike it hard with a hammer

I only learned these thing through onsite education from a blasing technician in a mine site

so do you want to elaborate a bit ?

Dave

He did give valid info, but nothing I can't find from google or wikipedia.
What I precisely asked for was what would be the force/blasting power/detonation velocity/shock (not sure about the unit) of the blasting cap in order to give C4 that kick-off reaction.

Im sorry if I was unclear.

Thanks in advance
 
Thermal shock works on most stable explosives too.

TNT does need a 2000 deg in a fractin of a second for a thermal shock detonation.
For more info on thermal shock sources search lightbulb fillament.

No ideea for C4, 2 wires with electric current clearly don't work it is very likley an insulator.
 
Back
Top