Two-stage BJT amplifier DC and AC analysis with β=100

1 reply · 2K views · last reply
Alkozy
Messages
3
Reaction score
0

Homework Statement


see pic in the attachment
beta = 100

Homework Equations


Rinput=Rth
Vinput=VTH
iB= ic/beta
IE=ic /alpha
iB=iE/(beta+1)
gm=IC/VT
Avo=-gmRC
Av=-gm(RC||RL)
Gv=-Beta[(RC||RL)/Rsig+(beta+1)re
re=alpha/gm

The Attempt at a Solution


solving each stage separately. First DC analysis. open all Capacitors.
V thevinin can be obtained by voltage divider = 2.88 v
R input = 31.97 K ohm
loop between the base and emitter
2.88-iB (31.97k)-0.7-iB(beta+1)(3.9k)=0
I have attached a pic of my attempt to solve it. please see attachment 2

i couldn't complete the solution
 
Attachments
  • Circuit schematic of a two-stage common-emitter BJT amplifier with source, Stage 1 and Stage 2 transistors Q1 and Q2, coupling capacitors, bias resistors R1, R2, RC, RE and load RL, with an emitter follower below.
    7.jpg
    32.3 KB · Views: 438
  • Handwritten DC analysis of a BJT stage with beta = 100: a Thevenin base network of 2.88 V and 31.97k, emitter resistor 3.9k to ground, collector resistor 6.8k to +9 V, with the base loop equation and resulting IB, IE, IC, gm and gain of -gm Rc = 4.71 mA/V.
    7s.jpg
    39.4 KB · Views: 442
Last edited by a moderator:
There is an important "+" sign missing from your first handwritten equation, iB = 2.88 (31.97k ...

This is something you would have readily discovered by repeating your analysis from scratch. Often that is the most expedient course, when trying to identify ones mistake.