What Eyepiece Focal Length Achieves a 350x Magnification in a Microscope?

AI Thread Summary
To achieve a 350x magnification in a microscope with a 21 cm distance between the objective and eyepiece lenses and a 5.5 mm focal length for the objective lens, the eyepiece focal length must be 2.4 cm. The discussion highlights two equations for calculating magnification, with the second equation incorporating a +25 adjustment for when the final image is formed at the near point (25 cm from the eye). The first equation does not include this adjustment and is used when the image is at infinity. The choice of formula depends on the image distance, which is not specified in the problem. Understanding these distinctions is crucial for accurate calculations in microscopy.
agenttiny200
Messages
23
Reaction score
0

Homework Statement


The distance between the objective and eyepiece lenses in a microscope is 21cm . The objective lens has a focal length of 5.5mm. What eyepiece focal length will give the microscope an overall angular magnification of 350?

Homework Equations


M=(25*d)/(fe*fo) or
M=(25*d)/(fe*fo)+25?

where d=5.5cm, M=350, f0=21cm, and fe is unknown

The Attempt at a Solution


The online program says the answer is 2.4cm using the second equation, so I'm wondering why I don't use the first equation that doesn't add +25, and where the +25 came from? It's really bugging me. (I do not mean the first 25 which is being multiplied by d).
 
Physics news on Phys.org
Is any more information given by the question? Is the eye relaxed or strained? A strained eye has a different equation from a relaxed eye.
 
Nope. Doesn't give any extra information. That's it.
 
There are two formula. The microscope can be setup so that the final image forms either at the near point
(25 cm from the eye) or very far away (infinity). The +25 formula is used when the image is formed at the near point (N = 25 cm) and the other one is used if it is formed very far away.
 
Last edited:
  • Like
Likes RaulTheUCSCSlug
andrevdh said:
There are two formula. The microscope can be setup so that the final image forms either at the near point
(25 cm from the eye) or very far away (infinity).
Explained here
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top