What Is the Aspect Ratio in Airfoil Design?

Thread starter theabdulmani
Start date Oct 25, 2010
Tags

Ratio

Oct 25, 2010

theabdulmani

in air foil :
what is aspect ratio: A= b/c

Engineering news on Phys.org

Oct 25, 2010

theabdulmani

please tell me the answer

Oct 25, 2010

russ_watters

Mentor

Insights Author

Welcome to PF.

We like to help people learn to help themselves. Please try googling for the answer first.

Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'

Scenario 1 (figure 1) A continuous loop of elastic material is stretched around two metal bars. The top bar is attached to a load cell that reads force. The lower bar can be moved downwards to stretch the elastic material. The lower bar is moved downwards until the two bars are 1190mm apart, stretching the elastic material. The bars are 5mm thick, so the total internal loop length is 1200mm (1190mm + 5mm + 5mm). At this level of stretch, the load cell reads 45N tensile force. Key numbers...

View full post »

Thread 'Cantilever help'

I'm trying to decide what size and type of galvanized steel I need for 2 cantilever extensions. The cantilever is 5 ft. The space between the two cantilever arms is a 17 ft Gap the center 7 ft of the 17 ft Gap we'll need to Bear approximately 17,000 lb spread evenly from the front of the cantilever to the back of the cantilever over 5 ft. I will put support beams across these cantilever arms to support the load evenly

View full post »