Block on slope with pulley and friction

  • Thread starter Cam169677
  • Start date
  • Tags Tags
    Kinetics
6 replies · 3K views · last reply
Cam169677
Messages
1
Reaction score
0

Homework Statement


As shown in the attachment.
At the instant shown the block is moving down the slope. What is the acceleration of the block up the slope if the kinetic coefficient of friction is 0.4?


The Attempt at a Solution



I'm having problems with two things here, the calculation of the normal reaction on the block as i don't know what to do about the angle of the line on the pulley and its resultant force...
This leads to my second problem when summing the total force in the x-direction i still don't know what to do with the 47N force...

Generally i need help!
 
Attachments
  • Free-body diagram of a 19 kg block on a 36 degree incline, with a pulley at the upper left edge of the slope, a 47 N force arrow at 31 deg, and the block's contact with the pulley shown.
    untitled1.JPG
    9.5 KB · Views: 485
Welcome to PF!

Hi Cam169677! Welcome to PF! :smile:

(is 31º the angle between the upper rope and the slope, and is the lower rope suppposed to be parallel to the slope? :confused:)
Cam169677 said:
I'm having problems with two things here, the calculation of the normal reaction on the block as i don't know what to do about the angle of the line on the pulley and its resultant force...

There's no acceleration in the normal direction, so just use good ol' Newton's second law in that direction … ∑F = 0. :wink:
This leads to my second problem when summing the total force in the x-direction i still don't know what to do with the 47N force...

what's the x-direction?

the obvious direction to use is the direction of the slope …

then the component of the 47N in that direction is 47(cos31º)N
 
I'm also having trouble with this.

"is 31º the angle between the upper rope and the slope, and is the lower rope suppposed to be parallel to the slope?"

That's what i want to find out as well hmm
 
Welcome to PF!

Hi PcKSnipE! Welcome to PF! :smile:
PcKSnipE said:
"is 31º the angle between the upper rope and the slope, and is the lower rope suppposed to be parallel to the slope?"

That's what i want to find out as well hmm

I assume it is.
 
Alright i worked it out, the tricky bit has to do with the pulley.

The total force of the pullet in the X plane is T + TcosA
The force in the normal direction (which affects friction) is mgcosA - TsinA

Gl
 
i still don't get wat to do here guys i have a similar question but using the following example can u tell me step by step wat to do and a answer as well
Thanx much appreciated
 
welcome to pf!

hi jalwa! welcome to pf! :wink:

better start a new thread …

make sure to show us what you've tried, and where you're stuck, and then we'll know how to help! :smile:​