Calculating A-hrs: Understanding a Car Battery's Performance and Efficiency

  • Thread starter Thread starter nckaytee
  • Start date Start date
  • Tags Tags
    Calculation
Click For Summary
A car battery rated at 70 A-hrs can be calculated for its duration at a current of 15A. The correct calculation involves dividing the amp-hour rating by the current, resulting in 4.67 hours or approximately 280 minutes, not 17.5 minutes as initially suggested. The discussion highlights a misunderstanding of the conversion between amp-hours and minutes, clarifying that 70 A-hrs divided by 15 A gives a straightforward answer in hours. The conversion to coulombs is unnecessary for this calculation. The final conclusion is that the battery can last around 280 minutes at a 15A draw.
nckaytee
Messages
39
Reaction score
0
My teacher posted a practice exam with no answers so I want to make sure I am doing my problems right.

A car battery is rated at 70 A-hrs. How many minutes can this battery last if it operates at a current of 15A?

I made an equation 70A/60min = Xmin/15A

So, X=17.5 min

Am I right?
 
Physics news on Phys.org


nckaytee said:
My teacher posted a practice exam with no answers so I want to make sure I am doing my problems right.

A car battery is rated at 70 A-hrs. How many minutes can this battery last if it operates at a current of 15A?

I made an equation 70A/60min = Xmin/15A

So, X=17.5 min

Am I right?

An amp is one coulombs per sec. That means that an Amp hour is 3600 coulombs.

70 amp hours is 252,000 coulombs.

15 amps is 15 coulombs per sec = 54,000 coulombs in an hour.
 


so 900 minutes?
 


nckaytee said:
so 900 minutes?

How did you get 900 minutes?

You have 252,000 coulombs to spend and you spend 54,000 an hour? How many hours is that again? Times how many minutes an hour?
 


Just divide 70 A-h by the 15 A, the A cross themselves out and your left with just the hours not necessary to switch to coulombs.
 
Thread 'Correct statement about size of wire to produce larger extension'
The answer is (B) but I don't really understand why. Based on formula of Young Modulus: $$x=\frac{FL}{AE}$$ The second wire made of the same material so it means they have same Young Modulus. Larger extension means larger value of ##x## so to get larger value of ##x## we can increase ##F## and ##L## and decrease ##A## I am not sure whether there is change in ##F## for first and second wire so I will just assume ##F## does not change. It leaves (B) and (C) as possible options so why is (C)...

Similar threads

  • · Replies 12 ·
Replies
12
Views
2K
  • · Replies 5 ·
Replies
5
Views
4K
  • · Replies 6 ·
Replies
6
Views
7K
Replies
10
Views
5K
Replies
3
Views
2K
  • · Replies 4 ·
Replies
4
Views
4K
  • · Replies 3 ·
Replies
3
Views
978
  • · Replies 3 ·
Replies
3
Views
4K
Replies
54
Views
11K
Replies
0
Views
2K