Construct an Egg-Safe Structure with Newspaper and Masking Tape

  • Thread starter Thread starter Phox
  • Start date Start date
  • Tags Tags
    Structure
AI Thread Summary
The discussion focuses on designing a structure using four sheets of newspaper and one meter of masking tape to safely catch four eggs dropped from a height of 6 feet. Initial attempts with a simple crumpled paper basket failed, prompting suggestions for multiple baskets stacked to slow the eggs down progressively. The importance of minimizing force on the eggs through gradual deceleration is emphasized, with ideas like accordion-folding the newspaper to absorb impact. A ramp is proposed to ensure that each egg can exit the structure before the next one is dropped. The conversation also touches on the physics of momentum and the design principles used in car safety features.
Phox
Messages
36
Reaction score
0
Alright. Um. We have 4 sheets of newspaper and 1 meter of masking tape. We have to design a structure to catch four eggs dropped one after another from a point at a height of 6 ft.

What do you guys think? We've tried making just a simple 'basket' filled with crumpled paper and it doesn't work because the egg just goes right through the crumples straight to the bottom and the eggs break.

Any ingenious ideas?
 
Engineering news on Phys.org
how about two or three baskets one on top of the other? As soon as it goes through one, it may have slowed down enough to not go through the other?

Also, for the physics of it, force is change of momentum over time (impulse). In this case, you want the lowest force possible on the egg and newspaper, so you want the egg to change its speed as slow as possible (momentum is mass times velocity). How about folding it accordion-like as many times as possible somehow? (and of course, leaving enough space in between each fold to give the egg time to fold the newspaper and not just crash through it)

I think some kind of shape like that would be optimal. Now for the part where they're dropped one after the other, I guess you'll need some kind of ramp to allow the eggs to get out of the way before the next one comes in, and quick enough, although that sounds annoying to have to do.

But yeah, that's the physics of it usually. An interesting case is in cars. The hoods for example, are made to crumple easily upon impact because in a crash, the act of crumpling gives the car more time to change its momentum and thus receive a weaker force to itself (and the driver). I don't know if you knew that, but I think it's interesting anyway. Good luck,

ordirules
 
Your initial conditions as posted don't require that the eggs are captured unbroken. That gives a lot of leeway.
Secondly, you don't say anything about the eggs having to be unboiled at the outset. That again makes a large difference as to how many angles of approach are available to you.
 
I would try a "funnel like" device similar to the thing that was being engineered as a deployable fire escape.
funnel to tube about the same diameter as the egg


dr
 
Hi all, I have a question. So from the derivation of the Isentropic process relationship PV^gamma = constant, there is a step dW = PdV, which can only be said for quasi-equilibrium (or reversible) processes. As such I believe PV^gamma = constant (and the family of equations) should not be applicable to just adiabatic processes? Ie, it should be applicable only for adiabatic + reversible = isentropic processes? However, I've seen couple of online notes/books, and...
Thread 'How can I find the cleanout for my building drain?'
I am a long distance truck driver, but I recently completed a plumbing program with Stratford Career Institute. In the chapter of my textbook Repairing DWV Systems, the author says that if there is a clog in the building drain, one can clear out the clog by using a snake augur or maybe some other type of tool into the cleanout for the building drain. The author said that the cleanout for the building drain is usually near the stack. I live in a duplex townhouse. Just out of curiosity, I...
I have an engine that uses a dry sump oiling system. The oil collection pan has three AN fittings to use for scavenging. Two of the fittings are approximately on the same level, the third is about 1/2 to 3/4 inch higher than the other two. The system ran for years with no problem using a three stage pump (one pressure and two scavenge stages). The two scavenge stages were connected at times to any two of the three AN fittings on the tank. Recently I tried an upgrade to a four stage pump...
Back
Top