Could you focus light from Sol's corona?

AI Thread Summary
Focusing light from the Sun's corona during a total solar eclipse to heat an object beyond the Sun's surface temperature is theoretically intriguing but practically challenging. The Second Law of Thermodynamics indicates that one cannot raise the temperature of a hotter object using heat from a cooler one, complicating the idea of using a magnifying glass to achieve this. The corona, while hotter than the Sun's surface, is tenuous and primarily emits X-rays, making it less effective for heating through visible light. Additionally, any focused light would still lose heat to the surrounding environment, necessitating a method to minimize heat loss. Overall, while the concept presents interesting possibilities, significant scientific and engineering hurdles remain.
negativzero
Messages
120
Reaction score
0
For instance, if you put a big "magnifying glass" above the atmosphere in the shadow of a total solar eclipse thus blocking out light from the "surface of the sun", could you heat an object to a temperature hotter than the surface of the sun? Applying the Second Law, one can't raise the temperature of a hotter object using the heat from a cooler object, not even by focusing light from the cool object with a magnifying glass. However, since the corona is typically at higher temperature than the surface, it seems feasible that one might be able focus enough of the coronal light to get more than 6000 K concentrated in a small spot. I'm assuming that since it's a total eclipse the radiation from the surface wouldn't dominate the spread of energies focused. I can't imagine what device would be used for such an experiment, or what the utility of it might be except perhaps to explode a tritium BB or something.
 
Science news on Phys.org
Hmm - that's an idea. The snag is that the temperature achieved would have to relate to a mean temperature over a full sphere. The optics to achieve that would be a bit taxing. For a start, the Moon, getting in the way, is far cooler than the body of the Sun. You could possibly do better without the eclipse and use the focussed radiation from the main body to 'blanket' the object that you wanted to heat up to more than 6000K.
 
Sounds right. "Blanket"? Do you have a synonym?
I haven't thought about design. Assuming that one is projecting an image on a surface, it seems like it would a nice trick to somehow exclude any disc at all from appearing on the image. I have no idea how to bend light around corners but perhaps an object or series of objects and a series or cascade of light bends might shrink the appearance of any disc to a lesser significance. It also bothers me that i don't quiet get the significance of the "spread" of frequencies that make black body so important in heating. I assume coronal light is far from black body radiation, but I'm naive.
 
negativzero said:
Sounds right. "Blanket"? Do you have a synonym?
The 'hot spot' would be losing heat not only back to the Sun - just as it will not be getting all the available heat from the Sun. If you surrounded the hot spot with a 'blanket' of his temperature then there would be less heat loss. That's an entirely practical comment.
About "black Body' radiation, you need to read about it to get the full story but the notion was studied way back by Lord Rayleigh and Jeans. If you take a cavity and allow it to fill with EM energy until it's in thermal equilibrium, you will end up with a balance of all frequencies, sharing the energy. The classical approach to this gave the answer that there would be more and more energy with increasing frequency (The Ultraviolet Catastrophe). Planck solved this anomaly by applying Quantum theory to the problem and produced a shape for the spectrum that achieves a balance between the energies at all frequencies. If you take an ideal cavity and make a small hole in it, the hole will behave like an ideal black body. And, of course, if you look into the hole and if the cavity is only at room temperature, it will look black because any light that gets into the hole will never get out. The cavity will look red / orange / blue-white, depending on the temperature of the cavity.
Do some Googling!
 
negativzero said:
For instance, if you put a big "magnifying glass" above the atmosphere in the shadow of a total solar eclipse thus blocking out light from the "surface of the sun", could you heat an object to a temperature hotter than the surface of the sun?
No - the corona isn't opaque.
 
  • Like
Likes sophiecentaur
negativzero said:
For instance, if you put a big "magnifying glass" above the atmosphere in the shadow of a total solar eclipse thus blocking out light from the "surface of the sun", could you heat an object to a temperature hotter than the surface of the sun?
ohhh my gosh, seriously ? :DD

russ_watters said:
No - the corona isn't opaque.

yup, and it is also VERY tenuous ( low density), it also has a temperature of over 1 million K
and finally it's primary radiative mode is in X-rays ... the visible light output is relatively low in comparisonDave
 
  • Like
Likes sophiecentaur
Back
Top