Efficient 2-in-1 Clamping System for Precise and Versatile Motion

  • Thread starter Thread starter ja5
  • Start date Start date
  • Tags Tags
    System
AI Thread Summary
A mechanism is needed that allows for both a 90-degree rotation and vertical movement of a few millimeters. The discussion seeks alternative solutions to an existing design. Participants are encouraged to explore the reasons for seeking alternatives, including potential issues with current options. The focus remains on finding efficient 2-in-1 clamping systems that can achieve precise and versatile motion. Overall, the goal is to identify innovative mechanisms that fulfill these motion requirements.
ja5
Messages
10
Reaction score
0
Hello,
I would need mechanism which can do two motions, one rotation for 90 degrees or more and then vertically for few milimeters.
Is there some idea, something like this


Here is image of what I mean.
http://imgur.com/nycnGeO
 
Engineering news on Phys.org
You've already found the answer so I'm not sure what your question is ?
 
My question is to find alternative solution.
 
What are the issues that cause you to be looking for an alternative?
 
Thread 'Turbocharging carbureted petrol 2 stroke engines'

Thread 'Turbocharging carbureted petrol 2 stroke engines'

Hi everyone, online I ve seen some images about 2 stroke carbureted turbo (motorcycle derivation engine). Now.. In the past in this forum some members spoke about turbocharging 2 stroke but not in sufficient detail. The intake and the exhaust are open at the same time and there are no valves like a 4 stroke. But if you search online you can find carbureted 2stroke turbo sled or the Am6 turbo. The question is: Is really possible turbocharge a 2 stroke carburated(NOT EFI)petrol engine and...
View full post »

Thread 'HP Required to move a robot 10meters at 1.5m/sec'

I need some assistance with calculating hp requirements for moving a load. - The 4000lb load is resting on ball bearing rails so friction is effectively zero and will be covered by my added power contingencies. Load: 4000lbs Distance to travel: 10 meters. Time to Travel: 7.5 seconds Need to accelerate the load from a stop to a nominal speed then decelerate coming to a stop. My power delivery method will be a gearmotor driving a gear rack. - I suspect the pinion gear to be about 3-4in in...
View full post »

Similar threads

Ball bearing cantilever system with maximal moment of inertia
Replies
16
Views
2K
Mechanical Advantage on Gym Machines
Replies
3
Views
241
Translating reciprocating motion into a 45 degree rotation
Replies
5
Views
2K
Crazy idea for battle bot. Can it work?
Replies
3
Views
1K
Motion transmission through a mechatronical wrist
Replies
11
Views
2K
Maximum torque required to turn the wheel along the vertical axis
Replies
9
Views
2K
Calibrating Pump/Venturi (Air) in a Closed Recirculating Water System
Replies
1
Views
408
What Are the Best Low-Friction Bearings for Precision Positioning Mechanisms?
Replies
30
Views
5K
A novel compound epicyclic gear system I can't seem to understand
Replies
1
Views
1K
Gravity battery question
Replies
18
Views
1K

Hot Threads

Recent Insights

Back
Top