Find work on raising a bucket on a rope

  • Thread starter Edwardo_Elric
  • Start date
  • Tags
    Rope Work
In summary, the old oaken bucket with a mass of 7.25kg is lifted 6.00m by pulling on a rope passing over a frictionless pulley at the top of a well. The work done by the person pulling on the rope is 426.3J, the work done by gravity is -426.3J, and the total work done on the bucket is 0J.
  • #1
Edwardo_Elric
101
0

Homework Statement


An old oaken bucket of mass 7.25kg hangs in a well at the end of a rope. The rope passes over a frictionless pulley at the top of the well, and you pull horizontally on the end of the rope to raise the bucket slowly a distance of 6.00m.
a.) How much work do you do on the bucket in pulling it up?
b.) How much work is done by the gravitational force acting on the bucket?
c.) What is the total work done in the bucket?

Homework Equations


W = Fscos(theta)

The Attempt at a Solution


a.) Work for bucket in pulling up:
So total force done is Fw = (7.25kg)(9.8m/s^2)
so
W = (7.25kg)(9.8m/s^2)(6.00m)
W = 426.3N

b.) Gravitational force :
W = 426.3N

c.) Total Work:
Wgrav is only acting i think the total work is
Wtotal = Wgrav
Wtotal = 426.3N

not sure
 
Physics news on Phys.org
  • #2
The units of work and energy are J (joules). So it should be 426.3J

Other than the units, a) is right.

b) should be -426.3J, because gravity is acting downwards, but the bucket is moving upwards... you've written gravitational "force"... did you mean gravitational work?

c) total work = 0J,

This is all assuming that the bucket starts and ends at rest... which I think is safe to assume for the problem.
 
  • #3
thanks a lot learningphysics
yep b is gravitational force but i ur ans is correct
 
Last edited:
  • #4
Edwardo_Elric said:
thanks a lot learningphysics

you're welcome. :smile:
 

1. How does raising a bucket on a rope work?

Raising a bucket on a rope involves using a pulley system to lift the bucket from a lower point to a higher point. The rope is wrapped around a pulley and the force of pulling down on the rope is used to lift the bucket.

2. What materials are needed to raise a bucket on a rope?

The materials needed for raising a bucket on a rope include a bucket, a rope, a pulley, and a secure anchor point for the rope. Optional materials may include a weight for the bucket or a motor to assist with lifting.

3. How much weight can be lifted using a bucket and rope?

The weight that can be lifted using a bucket and rope depends on the strength and durability of the materials used. It is important to choose materials that can support the weight of the bucket and its contents. It is also recommended to test the weight capacity before using the system for heavy loads.

4. What are the advantages of using a bucket and rope system?

One advantage of using a bucket and rope system is its simplicity and affordability. It can also be easily constructed and does not require any special skills or tools. Additionally, it can be used in various applications such as gardening, construction, and household chores.

5. Are there any safety precautions to consider when using a bucket and rope system?

Yes, there are some safety precautions to keep in mind when using a bucket and rope system. It is important to properly secure the anchor point and check the condition of the rope and pulley before use. It is also recommended to wear gloves and be cautious of the weight being lifted to avoid any accidents or injuries.

Similar threads

  • Introductory Physics Homework Help
Replies
3
Views
1K
  • Introductory Physics Homework Help
Replies
5
Views
1K
  • Introductory Physics Homework Help
Replies
4
Views
3K
  • Introductory Physics Homework Help
Replies
1
Views
2K
  • Introductory Physics Homework Help
Replies
5
Views
2K
  • Introductory Physics Homework Help
Replies
4
Views
6K
  • Introductory Physics Homework Help
Replies
22
Views
2K
  • Introductory Physics Homework Help
Replies
5
Views
3K
  • Introductory Physics Homework Help
Replies
18
Views
3K
  • Introductory Physics Homework Help
Replies
4
Views
2K
Back
Top