Finding emf and internal resistance from V-I graph

3 replies · 3K views · last reply
Gregg
Messages
452
Reaction score
0
Circuit schematic of a battery in series with an ammeter (A), a voltmeter (V) connected across the battery terminals, and a variable load resistor labelled R with a sliding contact arrow.


Graph to show the variation of the p.d. V across the battery with current I as R is varied.


Scatter plot on grid paper of p.d. in V against current in A, with five crosses and one point labelled M, none joined by a line of best fit; the points fall steadily from about 5.2 V at 0.3 A to about 1.2 V at 1.6 A.


i) Draw line of best fit.

ii) Use it to determine the emf of the battery;

and the internal resistance r of the battery.


The gradient [itex]\approx \frac{\Delta V}{\Delta I} = 1.67 \Omega[/itex]

Just don't know what to do really. Need an example and explanation of the concept.
 
Let the internal resistance of the battery be r.
The same current,I, passes through both r and R right?

So by Kirchoff's 2nd law

the emf of the battery=sum of the pd's around the loop
If V is the pd across the load then

E=V+Ir.

Since they plotted V against I, rearrange the equation it in the form a straight line y=mx+c

you calculated the gradient correctly to give a resistance. So rearrange the equation and you will see what that gradient represents and what the intercept represents as well.
 
[itex]V = f(I)[/itex]

[itex]V = -Ir + E[/itex]


y-intercept is emf, gradient is -r. Thanks.
 
Hi I had a similar question, which I posted at the the thread 'internal resistance graph'. It was basically why are V are I inversely proportional in this graph, but proportional in the graph of an ohmic conductor?