Finding power and complex power in AC circuits

2 replies · 3K views · last reply
funk21
Messages
3
Reaction score
0

Homework Statement


Circuit schematic of a series AC circuit with a voltage source labeled 160 angle 45 degrees V, a 3 ohm resistor, and an inductor labeled j1 ohms, with the problem statement about finding average power above.
Printed list of four problems asking for complex power: (a) P = 269 W, Q = 150 VAR (capacitive); (b) Q = 2000 VAR, pf = 0.9 (leading); (c) S = 600 VA, Q = 450 VAR (inductive); (d) Vrms = 220 V, P = 1 kW, |Z| = 40 Ω (inductive).

Homework Equations


The Attempt at a Solution



I am just lost on these two problems. What I think on the first one is that I have to convert the voltage but from there I am lost. I am guessing I also have to figure the current.

For the second problem, I know that S = P + Q. I am just lost on the other ones.

Thanks for the help.
 
Well you should know that Z=R+jX and I=V/Z, so find that and convert that into polar/Cartesian form.
 
For the second part, try drawing out a 'power triangle' and thinking about what each of the three sides represent.