How Do Deformation Mechanism Maps Connect Mechanics and Materials Science?

Astronuc
Staff Emeritus
Science Advisor
Gold Member
Messages
22,363
Reaction score
7,196
This material forms a bridge between mechanics and materials science.

MIT Open Course - http://ocw.mit.edu/OcwWeb/Materials-Science-and-Engineering/3-11Mechanics-of-MaterialsFall1999/Modules/index.htm

This is a fairly general course.


A more specialized area - DEFORMATION-MECHANISM MAPS
The Plasticity and Creep of Metals and Ceramics
 
Last edited by a moderator:
Engineering news on Phys.org
Thanx man..
 
Thread 'Turbocharging carbureted petrol 2 stroke engines'
Hi everyone, online I ve seen some images about 2 stroke carbureted turbo (motorcycle derivation engine). Now.. In the past in this forum some members spoke about turbocharging 2 stroke but not in sufficient detail. The intake and the exhaust are open at the same time and there are no valves like a 4 stroke. But if you search online you can find carbureted 2stroke turbo sled or the Am6 turbo. The question is: Is really possible turbocharge a 2 stroke carburated(NOT EFI)petrol engine and...
I need some assistance with calculating hp requirements for moving a load. - The 4000lb load is resting on ball bearing rails so friction is effectively zero and will be covered by my added power contingencies. Load: 4000lbs Distance to travel: 10 meters. Time to Travel: 7.5 seconds Need to accelerate the load from a stop to a nominal speed then decelerate coming to a stop. My power delivery method will be a gearmotor driving a gear rack. - I suspect the pinion gear to be about 3-4in in...
Thread 'Calculate minimum RPM to self-balance a CMG on two legs'
Here is a photo of a rough drawing of my apparatus that I have built many times and works. I would like to have a formula to give me the RPM necessary for the gyroscope to balance itself on the two legs (screws). I asked Claude to give me a formula and it gave me the following: Let me calculate the required RPM foreffective stabilization. I'll use the principles of gyroscopicprecession and the moment of inertia. First, let's calculate the keyparameters: 1. Moment of inertia of...
Back
Top