How far does a block travel before encountering a spring?

  • Thread starter Thread starter preluderacer
  • Start date Start date
  • Tags Tags
    Block Spring
Join the discussion
Registration is free. Ask a follow-up in this thread, or start your own.
15 replies · 5K views
preluderacer
Messages
83
Reaction score
0

Homework Statement


A block starts from rest at the top of a 31.0° inclined plane and encounters a spring, of constant 3.4 E3 N/m rigidly attached to the plane. If the block's mass is 33.0 kg and it compresses the spring by 37.0 cm, find the distance the block traveled before it encountered the spring.


Homework Equations


0.5(kx^2) i think


The Attempt at a Solution



Im quite sure how to find the speed or distance of the block.
 
Physics news on Phys.org
Ok here's what I did. Tell me if this was the correct thing to do. I set (1/2)mv^2=(1/2)kx^2 then solved for v. I got 3.76 m/s. After that I found out the acceleration by the block by doing 9.8cos31 degrees. I got 5.04 m/s^2. I then found out by doing 3.76/5.04 = 0.746 seconds. I then used the equation 1/2(V-Vo)(t). I found the distance to be 1.40 meters. Does this sound right?
 
hi preluderacer! :smile:

(try using the X2 icon just above the Reply box :wink:)
preluderacer said:
Ok here's what I did. Tell me if this was the correct thing to do. I set (1/2)mv^2=(1/2)kx^2 then solved for v. I got 3.76 m/s. After that I found out the acceleration by the block by doing 9.8cos31 degrees. I got 5.04 m/s^2. I then found out by doing 3.76/5.04 = 0.746 seconds. I then used the equation 1/2(V-Vo)(t). I found the distance to be 1.40 meters. Does this sound right?

Not quite.

You haven't included the gravtiational PE lost between the block hitting the spring (at speed v) and coming to rest.

And is it cos? :wink:
 
I did do 9.8sin30 degrees I just wrote cos for some reason here hah. Do I subject mgh then? I am confused now ughh.
 
Do I subtract mgh from the 1/2kx^2?
 
I thought I got V by doing 9.8sin31?
 
only until it hits the spring …

once it starts compressing the spring, v will also be affected by the spring

look at it another way … once you get the speed when it hits the spring, obviously from then on the spring tends to make the speed less, but does gravity tend to make the speed less or more?
 
I does more. So do I need to add mg?
 
mgh=1/2kx^2+1/2mv^2? I am so lost.
 
So do I just divide by mg?
 
Last edited:
hi preluderacer! :smile:

(just got up :zzz: …)
preluderacer said:
So do I just divide by mg?

no, rewrite h in terms of d (the distance asked for in the question), x, and 31°…

that will give you an equation for d, which is what you need! :wink: