Latent Heat of CAS No. 4719-04-4

AI Thread Summary
Information on the latent heat of 2, 2', 2" (Hexahydro-1,3,5-triazine-1,3,5-triyl)triethanol (CAS No. 4719-04-4) at a pressure of 480 Psig and a temperature of 150°F is sought, particularly for an engineering internship. The inquirer notes a lack of advanced chemistry knowledge and is unsure of where to find such specific data. Suggestions include consulting librarians, particularly in university or large R&D firm libraries, who may have access to specialized databases like Scifinder. Additionally, chemspider.com is recommended as a potential resource for chemical information.
jaredogden
Messages
77
Reaction score
0
I'm hoping someone can help me find information on this, I've been searching to no avail for it. I need to know the latent heat of 2, 2', 2" (Hexahydro-1,3,5-triazine-1,3,5-triyl)triethanol CAS No. 4719-04-4 at P = 480 Psig, T = 150°F. Can anyone point me in the right direction for some info on this?

Thanks
 
Chemistry news on Phys.org
Have you asked librarians for help? They often know tricks that mere mortals do not.
 
I have not, I'm at work doing an internship at an Engineering firm and was asked to find the latent heat of vaporization of the molecule I listed. I know it's an alcohol but not much besides that since I am not too advanced in my Chemistry understanding. I'm not sure if there is some tables that Chemists/Chemical engineers use with such information for this, sort of like the tables us Mechanical Engineers use steam tables for. Thanks for your help though.
 
There are tables, but they don't necessarily cover everything. And librarians at science (read: university, or large firms with a huge R&D depts) libraries usually know how to look for these things using databases like Scifinder.

Have you tried chemspider.com?
 
I want to test a humidity sensor with one or more saturated salt solutions. The table salt that I have on hand contains one of two anticaking agents, calcium silicate or sodium aluminosilicate. Will the presence of either of these additives (or iodine for that matter) significantly affect the equilibrium humidity? I searched and all the how-to-do-it guides did not address this question. One research paper I found reported that at 1.5% w/w calcium silicate increased the deliquescent point by...
I was introduced to the Octet Rule recently and make me wonder, why does 8 valence electrons or a full p orbital always make an element inert? What is so special with a full p orbital? Like take Calcium for an example, its outer orbital is filled but its only the s orbital thats filled so its still reactive not so much as the Alkaline metals but still pretty reactive. Can someone explain it to me? Thanks!!
I'm trying to find a cheap DIY method to etch holes of various shapes through 0.3mm Aluminium sheet using 5-10% Sodium Hydroxide. The idea is to apply a resist to the Aluminium then selectively ablate it off using a diode laser cutter and then dissolve away the Aluminium using Sodium Hydroxide. By cheap I mean resists costing say £20 in small quantities. The Internet has suggested various resists to try including... Enamel paint (only survived seconds in the NaOH!) Acrylic paint (only...
Back
Top