Logitech X-530 - AM radio frequency

Click For Summary
SUMMARY

The Logitech X-530 speakers can inadvertently pick up AM radio frequencies due to their design, which lacks specific tuned circuits. This phenomenon occurs when the speaker cables or amplifier act as antennas, capturing nearby radio signals, often from local AM stations or other radio sources. Users have reported instances of hearing radio broadcasts through their speakers, especially when using long speaker cables. To mitigate this issue, implementing RF chokes and small ceramic capacitors can help reduce unwanted signal interference.

PREREQUISITES
  • Understanding of audio signal transmission and interference
  • Familiarity with RF chokes and their application in electronics
  • Knowledge of AM radio frequency ranges and broadcasting
  • Basic electronics knowledge regarding amplifiers and speaker systems
NEXT STEPS
  • Research the implementation of RF chokes in audio systems
  • Learn about the characteristics of AM radio frequencies and their transmission
  • Explore methods for reducing electromagnetic interference in audio equipment
  • Investigate the design and function of audio amplifiers and their components
USEFUL FOR

Audio engineers, electronics hobbyists, and anyone experiencing interference issues with speaker systems will benefit from this discussion.

konrado5
Messages
2
Reaction score
0
I have poorly made computer speakers - Logitech X-530. They sometimes pick up AM radio stations and pops up when lightning is turned off. What AM radio frequency is picked up by computer speakers? I am curious becaous some kinds of popping is picked up by computer speakers but it is not picked up by AM radio on frequency about 1600 kHz.
 
Engineering news on Phys.org
hi there konrado5
welcome to PF :smile:

konrado5 said:
I have poorly made computer speakers - Logitech X-530. They sometimes pick up AM radio stations and pops up when lightning is turned off. What AM radio frequency is picked up by computer speakers? I am curious because some kinds of popping is picked up by computer speakers but it is not picked up by AM radio on frequency about 1600 kHz.

radio signals being picked up by audio gear is a problem as old as the 2 of them have been around.
commonly caused by close proximity to a radio/TV station transmitter and the signal is easily overloading and being received by the audio gear

Either the cable between your computer and the speakers and or the cable between amplifier and speaker acting as an antenna
The signal is brought into the amplifier where is rectified/demodulated by the diode junction within anyone of the transistors of the amplifier
then amplified and outputted to the speaker(s) along with the computer sound

RF chokes ( a few turns of the speaker cable(s) or input cable wound around a ferrite core along with some small value ceramic capacitors across
the speaker lines and input line will often help ( capacitor values of around 0.01 - 0.1 uF could be experimented with)cheers
Dave
 
  • Like
Likes   Reactions: Ouabache
Perhaps I written this post not clearly enough but my question is merely question caused by curiosity. What AM frequency is picked up if speakers acting as an antenna?
 
konrado5 said:
Perhaps I written this post not clearly enough but my question is merely question caused by curiosity.

you did and I answered :smile:

konrado5 said:
What AM frequency is picked up if speakers acting as an antenna?

since there is no specific tuned circuits in the cables/amplifier system, it will be prone to picking up the strongest signal there is nearby
As I said, it may be a radio or a TV station ... It may even be a CB radio or a commercial VHF vehicle radio ... in say a taxi or a courier truck etc

many years ago, when I lived in a different country, there was a PA system in a hall, I operated and looked after with several other colleagues
We were regularly plagued with taxi cabs that would sit outside the building and use they radio to talk back to base and their audio would come
blasting through the PA speakers. Those radios were on around 75 MHz and 10W transmit

Other times I have seen gear from people that live within 5 - 10 km of a radio or TV broadcast transmitter and the RF signal can get into all sorts of electronics
AM radio stations are typically around 10 kW transmit power and TV stations can be up around 100 kW. It can cause all sorts of weird problems

maybe you have a station nearby ??cheers
Dave
 
  • Like
Likes   Reactions: Ouabache
In addition to what davenn has described..
I too have experienced this phenomenon. At college when I wired speakers to the kitchen, my source signal (stereo receiver/turntable/CD player) was located in a distant room. When i played jazz or classical music through my speakers, during in the quiet sections I could hear a radio station. The long length of speaker wire across the apartment was probably acting as an antenna and coupled the signal into my wires and ultimately to my speakers.

To find out what radio frequency it was. I took an AM/FM receiver and tuned across both bands until I found the station. It turned out to be our local college AM station WBAA on 920kHz. This is an example of what davenn described, the signal coming from a nearby AM station. The WBAA broadcast studio is on campus and the transmitter, over the ouabache river in the neighboring town. A digitally tunable AM receiver will show you what frequency is being picked up. Alternatively, if you listen; every broadcast station will identify with their call letters at least once per hour. If they don't happen to mention the broadcast frequency, you can look up their call letters on the web and quickly find out the frequency.
 
  • Like
Likes   Reactions: davenn

Similar threads

Replies
15
Views
2K
  • · Replies 11 ·
Replies
11
Views
4K
Replies
74
Views
10K
Replies
20
Views
2K
  • · Replies 29 ·
Replies
29
Views
5K
  • · Replies 5 ·
Replies
5
Views
2K
  • · Replies 28 ·
Replies
28
Views
3K
  • · Replies 11 ·
Replies
11
Views
3K
  • · Replies 13 ·
Replies
13
Views
2K
  • · Replies 14 ·
Replies
14
Views
3K