Can a Carbon Dioxide Vent on a Mars Rover Solve Dust Buildup on Solar Panels?

Click For Summary
SUMMARY

The discussion centers on the feasibility of using a carbon dioxide vent on a Mars rover's robotic arm to mitigate dust accumulation on solar panels. Participants highlight the challenges posed by the thin Martian atmosphere, which is 1/60th the density of Earth's air, making it difficult for any dust-removal mechanism to be effective. Suggestions include using a mechanical fan or pressurized gas, but concerns about weight and complexity lead to the conclusion that adding more solar panels may be a more reliable solution. Historical context is provided, noting that dust issues were a significant factor in the decision to equip the Curiosity rover with a nuclear generator instead of solar panels.

PREREQUISITES
  • Understanding of Martian atmospheric conditions
  • Knowledge of rover design and weight constraints
  • Familiarity with solar panel technology and its limitations on Mars
  • Insight into engineering trade-offs in space missions
NEXT STEPS
  • Research the engineering considerations for solar panel cleaning on Mars missions
  • Explore the design and functionality of the Curiosity rover's nuclear generator
  • Investigate alternative dust mitigation technologies for solar panels in low-density atmospheres
  • Examine the potential for integrating solar panels into other rover components, such as rotor blades
USEFUL FOR

Aerospace engineers, planetary scientists, and anyone involved in the design and operation of Mars rovers or solar energy systems in extraterrestrial environments.

roineust
Messages
341
Reaction score
9
i'v googled the subject and it seems like a serious problem, e.g. the dust accumulating on the solar panels, there has even been a term coined 'cleaning event' for Mars winds, as if this is a matter of luck to get the solar panels cleaned. A small carbon-dioxide vent on the tip of the rover robotic arm? da? Would it be such a weight increase, for resolving such a dramatic problem? OK, these are much smarter people than me..what am i missing?
 
Physics news on Phys.org
roineust said:
A small carbon-dioxide vent on the tip of the rover robotic arm
What's the vent supposed to be doing, exactly?
 
  • Like
Likes   Reactions: roineust
Jump to 3:45
 
Do you mean to say 'a mechanical fan pushing Martian atmosphere around to blow off the dust'?
 
  • Like
Likes   Reactions: roineust
Yes, fan carried by the rover's robotic arm, pushing atmosphere selectively at an angle and force that takes the dust off the panels, without hitting the surface dust.
 
Then consider the availability of the working medium for the fan. The density of air is 1/60 of that on Earth. You'd need some really high-performance (large and heavy + energy consuming) device to have any hope of blowing anything off the panels.
 
  • Like
Likes   Reactions: roineust
Pressurizing into a small bottle and then releasing? Maybe a slower process than using Earth air, but still hours if not minutes duration, not so? Would it add so much to the overall weight, if compression will be used and not a fan?
 
Last edited:
In the case of a pressurised supply of gas (or e.g. mechanical wipers), my guess would be it just doesn't warrant the extra weight and complexity, where you can instead just add some extra panels for the same weight, and get a similar, but more reliable (due to simplicity), power performance extension.
 
  • Like
Likes   Reactions: roineust
Yes, although i speculate that such a system could be developed to weight under 500 grams and would not be the most complex system on board such a rover, which weighs 180 kg in the case of Opportunity and 900 kg for the Curiosity. It is most likely that such a system and many other alternatives for cleaning the solar panels, were considered and rejected for the Opportunity.
Apparently the dust problem was among the reasons they did not use solar panels, on board the Curiosity (not even as a backup system?): https://www.technologyreview.com/s/428751/nuclear-generator-powers-curiosity-mars-mission/
 
Last edited:
  • #10
I've heard they went over the engineering process for MER in Roving Mars (the book), including considerations of panel cleaning. It might be of interest to you.
 
  • Like
Likes   Reactions: berkeman and roineust
  • #11
Thanks, i'll look into it.
 
  • #13
Nice idea.
 
  • Like
Likes   Reactions: roineust

Similar threads

  • · Replies 2 ·
Replies
2
Views
3K
  • · Replies 2 ·
Replies
2
Views
4K