Mechanics of materials exercise solution check

3 replies · 2K views · last reply
niece of md.
Messages
4
Reaction score
0

Homework Statement



Textbook problem 1.10 with printed text stating both portions of rod ABC are aluminum, E = 73 GPa, portion BC diameter d = 20 mm, and a 3D diagram of a stepped rod fixed to a wall at A with a 30 mm section, a 1.2 m and 0.8 m length, and force P applied at end C.




Homework Equations



Four boxed formulas from mechanics of materials: elongation Δl = F·L/(A·E) in mm; Δl_max ≤ [Δl] mm; allowable stress [σ] = σy/[S]; and stress σ = F/A in MPa (N/mm²).




The Attempt at a Solution



Handwritten mechanics of materials solution: a stepped bar diagram with segment diameters d=30 mm and d=20 mm, lengths 4.2 m and 0.8 m, load P, then stress and elongation calculations ending with Delta L = 2.934 mm and P = 50.26 kN.


I was attempting to solve this exercise, but since I have no answers, I have no way of knowing if it's correct.

Any help Is more than appreciated
 
All the best! There is my verification
http://img821.imageshack.us/img821/8128/tophysicsforum02.png
 
Last edited by a moderator:
By the way Elongations (z - from left to right within each segment)
[itex]w_{{1}}=4\,{\frac {Pz}{E\pi \,{{\it Diam}}^{2}}}[/itex]

[itex]w_{{2}}=4\,{\frac {P \left( z{{\it Diam}}^{2}+a{{\it diam}}^{2}<br /> \right) }{{{\it Diam}}^{2}E\pi \,{{\it diam}}^{2}}}[/itex]