Neutron induced Swelling tutorials in ANSYS

AI Thread Summary
Gautham, an M.Tech student at IGCAR, is seeking assistance with modeling swelling parameters in ANSYS for a project on fuel subassembly bowing due to thermal gradients. He is using SS316 LN as the material and is unsure how to input swelling data into ANSYS. It is suggested that he develop a user routine, such as USERSW, and consult the ANSYS documentation for guidance on user-programmable features. Gautham is also requesting any available subroutines or tutorials related to swelling modeling in ANSYS. The discussion highlights the complexities of incorporating swelling parameters influenced by various factors like lattice damage and irradiation conditions.
bhaskarhebbar
Messages
3
Reaction score
0
Dear all,

I am gautama currently pursuing my M.Tech in Fast breeder reactor at IGCAR. The project is based on the fuel sub assembly bowing due to thermal, swelling gradients. Using a FEM software ANSYS i have modeled the Sub assembly, but i am not able to give swelling parameter in ANSYS. Anyone who knows it please help me. You can also send me a PM.

Thanks in advance
Gautham, Manipal University
 
Last edited by a moderator:
Engineering news on Phys.org
bhaskarhebbar said:
Dear all,

I am gautama currently pursuing my M.Tech in Fast breeder reactor at IGCAR. The project is based on the fuel sub assembly bowing due to thermal, swelling gradients. Using a FEM software ANSYS i have modeled the Sub assembly, but i am not able to give swelling parameter in ANSYS. Anyone who knows it please help me. You can also send me a PM.

Thanks in advance
Gautham, Manipal University
Is one modeling SS316L?

Usually, swelling is correlated with the lattice damage, or displacements per atom (dpa), which itself often correlated to fast fluence (which is spectrally dependent). There are also compositional, irradiation temperature and dose rate (and history) influences, so one has to be careful when applying models obtained from the literature.
 
Thank you for your reply.Ya the material is SS316 LN. But i am still not clear how to input swelling in ANSYS??
 
Last edited:
One has to develop a user routine, e.g., USERSW, to model swelling in ANSYS.

Read the ANSYS documentation - Guide to ANSYS User Programmable Features.
 
Thanks for the info..Sir, do you have any sub routines to develop a model?? can you pls mail me tat?? bcs no sub routines are available to refer and develop my model.And also if u have any swelling tutorials pls mail me..
 

Similar threads

Prompt neutrons, delayed neutrons, chain reaction control
Replies
36
Views
7K

Hot Threads

Recent Insights

Back
Top