Problem in finite element method using direct stiffness method

2 replies · 3K views · last reply
chiraganand
Messages
111
Reaction score
1
Hi,

This is a sample problem from logan finite element method. I have attached the problem and solution given in the book. As per the problem i first derived the stiffness matrix and den putting the boundary conditions started solving for the forces. I am stuck as three forces are unknown but when i checked the book it says the force at third node is zero. Can someone tell me why this force is assumed as zero?
 
Attachments
  • Two-page textbook excerpt: left page shows a spring assemblage diagram with four nodes and element stiffness matrices (2.5.16), global stiffness matrix (2.5.17) and nodal force equation (2.5.18); right page shows reduced system (2.5.19) and nodal displacements u1 = 10/11 in. and u4 = 15/11 in. (2.5.20).
    sample problem.jpg
    24.5 KB · Views: 558
F3x = 0 since only one applied force is present in the problem at node 4. So F4x = 5000 lb.
 
rock.freak667 said:
F3x = 0 since only one applied force is present in the problem at node 4. So F4x = 5000 lb.
But shudnt there be a reaction at 3rd node