Radius of disk suspended on its edge

In summary, to calculate the radius of a disk suspended by a nail and oscillating with a period of 1.25 seconds, you can use the formula for period of a simple pendulum and the Parallel Axis Theorem. By finding the moment of inertia of the disk around its pivot point and converting it to a point mass on a string, you can solve for the radius of the disk. This conversion can be done by finding the distance a point mass would need to be from the pivot point in order to have the same moment of inertia as the disk. This radius can then be calculated using the given oscillation period.
  • #1
songoku
2,292
325
Homework Statement
A disk is suspended by a nail such that the pivot in a vertical plane about a point on the edge of the disk. If the period of oscillation of the disk is 1.25 s, what is the disk's radius?
a. 26 cm
b. 78 cm
c. 51 cm
d. impossible to know without the disk's mass
Relevant Equations
ω = 2π / T
I can calculate the angular speed but I don't know how to calculate the radius. Is there certain formula to calculate it?

Thanks
 
Physics news on Phys.org
  • #2
The trick will be to convert this into a problem involving a simple pendulum. Then you can use the formulas for motion of a pendulum.

To do that, first find the moment of inertia (MOI) of the disk around the pivot, which will be a function of the radius R and the density ρ of the disk (kg per sq metre of surface area). To find that, find the MOI of the disk around its centre (Wikipeda has a list of moments of inertia, including that of a disk), then use the Parallel Axis Theorem.

Next, convert it to a problem involving a point mass on the end of a string - the classic simple pendulum problem. To do that, work out the distance L from the pivot that a point mass has to be in order to have the same MOI about the pivot as the disk does. That will give you r in terms of R, as ρ will cancel out.

Then plug the given oscillation period into the standard formula for period of a simple pendulum to calculate L, and calculate R from that.
 
  • Like
Likes songoku
  • #3
songoku said:
Homework Statement: A disk is suspended by a nail such that the pivot in a vertical plane about a point on the edge of the disk. If the period of oscillation of the disk is 1.25 s, what is the disk's radius?
a. 26 cm
b. 78 cm
c. 51 cm
d. impossible to know without the disk's mass
Homework Equations: ω = 2π / T

I can calculate the angular speed but I don't know how to calculate the radius. Is there certain formula to calculate it?

Thanks
Show how did you calculate the angular speed?
It is a "Physical Pendulum", Browse or read http://hyperphysics.phy-astr.gsu.edu/hbase/pendp.html
 
  • Like
Likes songoku
  • #4
andrewkirk said:
The trick will be to convert this into a problem involving a simple pendulum. Then you can use the formulas for motion of a pendulum.

To do that, first find the moment of inertia (MOI) of the disk around the pivot, which will be a function of the radius R and the density ρ of the disk (kg per sq metre of surface area). To find that, find the MOI of the disk around its centre (Wikipeda has a list of moments of inertia, including that of a disk), then use the Parallel Axis Theorem.

Next, convert it to a problem involving a point mass on the end of a string - the classic simple pendulum problem. To do that, work out the distance L from the pivot that a point mass has to be in order to have the same MOI about the pivot as the disk does. That will give you r in terms of R, as ρ will cancel out.

Then plug the given oscillation period into the standard formula for period of a simple pendulum to calculate L, and calculate R from that.
ehild said:
Show how did you calculate the angular speed?
It is a "Physical Pendulum", Browse or read http://hyperphysics.phy-astr.gsu.edu/hbase/pendp.html

I think I get the hint.

Thank you very much andrewkirk and ehild
 

1. What is the radius of a disk suspended on its edge?

The radius of a disk suspended on its edge is the distance from the center of the disk to its outer edge.

2. How is the radius of a disk suspended on its edge measured?

The radius of a disk suspended on its edge can be measured by using a ruler or measuring tape to determine the distance from the center of the disk to its outer edge. It can also be calculated using the formula r = d/2, where r is the radius and d is the diameter of the disk.

3. What factors affect the radius of a disk suspended on its edge?

The main factor that affects the radius of a disk suspended on its edge is the diameter of the disk. The larger the diameter, the larger the radius will be. Other factors such as the material and thickness of the disk may also have an impact on the radius.

4. What is the significance of the radius of a disk suspended on its edge?

The radius of a disk suspended on its edge is an important parameter in understanding the physical properties of the disk. It can affect the stability, strength, and rotational speed of the disk, and is crucial in many engineering and scientific applications.

5. Can the radius of a disk suspended on its edge change?

Yes, the radius of a disk suspended on its edge can change depending on external factors such as temperature, pressure, and applied forces. It can also change over time due to wear and tear or deformation of the disk.

Similar threads

  • Introductory Physics Homework Help
Replies
8
Views
997
  • Introductory Physics Homework Help
Replies
1
Views
757
  • Introductory Physics Homework Help
Replies
2
Views
361
  • Introductory Physics Homework Help
Replies
3
Views
840
  • Introductory Physics Homework Help
Replies
24
Views
2K
  • Introductory Physics Homework Help
Replies
5
Views
969
  • Introductory Physics Homework Help
Replies
19
Views
2K
  • Introductory Physics Homework Help
Replies
7
Views
784
  • Introductory Physics Homework Help
Replies
5
Views
659
  • Introductory Physics Homework Help
Replies
1
Views
1K
Back
Top