Selecting a Vacuum Pump: 5 CFM, Argon/Air, High Heat, Small Particles

[M.Pesh]

Hello,

I need some help selecting a vacuum pump.
Required specs

- 5 CFM
- vacuum (0-10 in/mg)
- possibility of sucking up small metal particles (size:50-200 microns)
- working fluid is argon/air
- needs to handle high heat

My original feeling was to go with a venturi design made my FESTO. But I don't like the idea of wasting compressed air.

 

[jaap de vries]

Do you mean 0-10 inHg? (http://en.wikipedia.org/wiki/Inch_of_mercury" ). When you talk about vacuum pumps it is the zero part in the 0-10 that makes all the difference. How close to 0 does your vacuum need to be.

There are different gradations in vacuum:

Atmospheric pressure 760 Torr 101.3 kPa
Low vacuum 760 to 25 Torr 100 to 3 kPa
Medium vacuum 25 to 1×10-3 Torr 3 kPa to 100 mPa
High vacuum 1×10-3 to 1×10-9 Torr 100 mPa to 100 nPa
Ultra high vacuum 1×10-9 to 1×10-12 Torr 100 nPa to 100 pPa
Extremely high vacuum <1×10-12 Torr <100 pPa

For medium vacuum you can use a roughing (positive displacement, rotary vane) pump. http://www.varianinc.com/cgi-bin/nav?products/vacuum/pumps/index&cid=KKKLPLPJFO".

 

[FredGarvin]

I would highly recommend that if you are not used to spec'ing out a pump yourself that you go through a supplier that can size one for you. Especially with vacuum pumps. Look for your local reps under something like ThomasNet.

 

[M.Pesh]

Thanks for the help,
I should have clarified myself better, What I was looking for was 0-10inHg gauge pressure This leaves me well into the low vacuum region.

 

[CFDFEAGURU]

If you want to get to low vacuum and your chamber has a relatively small volume you should use a roughing pump to back up the turb-mech pump. Also try the company Lybold (I think it is spelled correclty) located in Delmont, PA.

 

[Redbelly98]

A turbo pump is overkill. He only needs 10 inHg gauge pressure, which is around 20 inHg or 500 Torr absolute pressure.

 

[Torricelli]

10 inHg Vac = 254 mmHg Vac = 506 Torr = 674 mbar = 67.4 Kpa

this is a depression, but not really to be considered as a vacuum.

Also 5 cfm (8.5 m³/h) is very small for a mechanical pump: you original idea of an air driven ejector is probably the best solution. If compressed air is not available you may look for a mini liquid ring vacuum pump.

Manufacturers for ejectors and vacuum pumps are listed in www.vacuum-guide.com

 

[whaley2]

i need some help also in choosing a vacuum pump. i am currently in the process of manufacturing small plastic parts. a serious problem i need to fix is the air bubbles trapped within the resin compounds, thus resulting in a flawed final project. i am new to the degassing/vacuum chamber world so forgive my lack of knowledge in this field. i do not need a massive pump for i am only degassing no more than 5 fl oz of resin with a viscoscity around 500 cps with the possibly of up to 2000 cps. i was looking at a vacuum pump made by Robinair product id rob15800 with a 8cfm rating. i was thinking of linking it up to a vacuum chamber to perform the degassing. i wanted to see if a that company was any good and if that pump would do the job, and b if anyone has a better suggestion...any help would be much appreicated. thank you for your time