Silicon component SEU threshold with oxygen ion irradiation

3 replies · 2K views · last reply
Firben
Messages
141
Reaction score
0

Homework Statement


[/B]
A silicon component is irradiated in an accelerator. The oxygen ion beam is pointed in the direction of the shortest dimension of the sensitive volume of the device. The energy required for producing an electron/hole pair in silicon is 3.6 eV. It is found that the highest energy for which SEU (Single-Event Upsets or “soft errors”) is observed is 10 MeV/nucleon. Assume that the shortest dimension of the sensitive volume is 2 µm and that ion energies do not change during traveling.

Homework Equations



Ec = ρSi*d*LETm,th

Figure:
http://s716.photobucket.com/user/Pitoraq/media/LET_zpsqdevvbpw.png.html

The Attempt at a Solution



ρSi = 2.33 g/cm^2
d = 2μm

I have trouble to read of the diagram of what LETTh is. If the energy is 10 Mev and if i draw a straight line upward i got the value of 10^0 or 1 LET (Mev * cm^2/mg). In the solution manual the LETTh value is 0.85 why ?

Ec = 2.33*0.0002*0.9/10^-3 = 0.391 Mev
[/B]
 
Firben said:
I have trouble to read of the diagram of what LETTh is. If the energy is 10 Mev and if i draw a straight line upward i got the value of 10^0 or 1 LET (Mev * cm^2/mg).
I get a smaller value, even a bit below 0.85.
 
Using your pixel values for the positions, I get about 0.87. I put it one pixel lower which gave 0.82. It is a log scale, so 15% difference is not much.