Stored Energy In a Capacitor

  • Thread starter Thread starter yankeekd25
  • Start date Start date
  • Tags Tags
    Capacitor Energy
AI Thread Summary
The discussion revolves around calculating the stored energy in a parallel plate capacitor after changes to its configuration. Initially, the capacitor has a dielectric material and stores 21.6 Joules of energy. When the dielectric is removed and the plate distance is halved while connected to the battery, the capacitance changes, affecting the stored energy. The key point is that while capacitance changes, the voltage remains constant due to the battery connection, leading to a proportional change in stored energy. Participants emphasize finding the new capacitance and using the relationship between capacitance and stored energy to determine the new energy value.
yankeekd25
Messages
27
Reaction score
0

Homework Statement



A parallel plate is connected to one battery and has a material with a dielectric constant of 1.57 filling the space between the plates. The stored energy for the parallel plate capacitor is 21.6 Joules. While connected to the same battery the distance between the plates is decreased by a multiple of 2.3 and the dielectric is removed so that there is nothing between the plates. What is the stored energy in the capacitor now in Joules?

Homework Equations



C= K Enot A / d
Co= C/ K
U = 1/2 QV, or Q^2 / 2c

The Attempt at a Solution


I'm not really sure where to go on this problem. Do I have to somehow find the voltage of the battery and do something with that? Or maybe the C or Q? thanks.
 
Physics news on Phys.org
Yes, you need to find the voltage of the battery first. Then you need to find the new capacitance.
 
kuruman said:
Yes, you need to find the voltage of the battery first. Then you need to find the new capacitance.

Using the U= 1/2 Q V formula? Or something else? If that formula, how do I find Q?
 
When the dielectric is removed and the plates are moved closer together does Q change or does it remain the same?
 
kuruman said:
When the dielectric is removed and the plates are moved closer together does Q change or does it remain the same?

Would Q change?. is there something you can do with the equations then to find an equation for V?
 
You do not have to find the actual voltage or capacitance - in any case you do not have all the information required for this.

What IS required is the proportion by which capacitance is changed.

Te remainder of this post was in error due to misreading of the original question, and so has been deleted.
 
Last edited:
Please think again. The battery remains connected. If C changes and if Q remains constant (according to you) what happens to V?
 
kuruman said:
Please think again. The battery remains connected. If C changes and if Q remains constant (according to you) what happens to V?

V will increase?
 
I can only apologise for not having read the initial post carefully enough - I had assumed that the capacitor was initially charged, then isolated from the battery.

If the battery remains connected then the problem is simpler, as the voltage must remain constant and only the capacitance changes .

The charge (CV) and the stored energy (CV2/2) will each change in the same proportion as the capacitance, so you need to find that proportion, and multiply it by the initial energy.
 
Back
Top